Reviews of products for scale automotive models, including motorcycles and motorized vehicles.

Review Author
Michael A. Turco
Published on
Company
Italeri
Scale
1/12
MSRP
$298.99

The Kit

Italeri’s new multi-media Alfa Romeo 2300 8C “Monza” race car kit comes in an impressive box measuring 22” x 11” x 4-1/2” (Photo 1). An illustration of the box contents is shown on one of the box lid flaps (Photo 2). Upon opening the box, you find a 28-page instruction booklet, four plastic bags containing 10 styrene sprues, including duplicates of the “D” and “G” sprues, two bags of hardware with various sized screws and nuts, a decal sheet, masking sheet, steel photoetch sheet, nylon mesh sheet, rubber tires, copper wire, rope and rubber tubing (Photo 3). The kit offers using either masks or decals for the No. 28 race car driven by the famous Italian driver Tazio Nuvolari, a nice feature. To try both for the purpose of this build review, I masked the radiator No. 28 and used decals for the body numbers. I used the length of rope to replicate its use as heat protection on the exhaust pipe in the Nuvolari car.

Review Author
Bill O'Malley
Published on
Company
ICM
Scale
1/24
MSRP
$49.99

Background

One of the most numerous and famous cars in world history was the Model T produced by the Ford Motor Company. It became the first mass-production car and was affordable for middle class. The first examples of the Model T were built starting on October 1, 1908. It had a four-cylinder engine of 20 hp. The mass production was launched at the Highland Park Ford Plant, Michigan beginning in 1910. There were 16.5 million cars produced between 1908 and 1927. Model T cars were produced in different types, like the 1912 Light Delivery Cars.

The Light Delivery Car version is another of ICM‘s excellent series of 1/24 scale Model T kits. Other 1/24 scale Model T kits released by ICM include:

Book Author(s)
Mark Walker
Review Author
Bill O'Malley
Published on
Company
Veloce Publishing
MSRP
$50.00

About the Author

Author Mark Walker bought his first VW Beetle at age 16 and has since owned more than 100 Volkswagens. Walker was the owner and operator of several VW restoration companies and has carried out sympathetic restoration and high-quality suspension modifications for magazine feature cars. Mark has written for VolksWorld and Camper & Bus magazines since 2012.

Patina Volkswagens

This book focuses on 1974 or older Volkswagens with original paint, rust, and patina that have recently become more popular than cars restored to show condition. These rare unspoiled survivors tell a story of an interesting and varied past and have inspired a generation of car fanatics that might not be able to afford complete restorations.

The book is packed with excellent color photographs, and text provides insight to the car builders, dealers, celebrities, and hobbyists that have styled these unique cars.

Book Author(s)
Graham Robson
Review Author
Frank Landrus
Published on
Company
Veloce Publishing
MSRP
$22.00

This is a reprint of the original edition first published in 2010, and now is available in Veloce's Classic Reprint Series. The author's biography is available on the Veloce website above and is as follows:

Review Author
Ken Prager
Published on
Company
Hasegawa
Scale
1/24
MSRP
$52.99

The 1992 Japanese touring car championship season was the 8th edition of the series. The series was nine events long running April thru November, Finishing up at the Fuji International Speedway in Japan. the series was run under several different regulations during it's existence. The series included international categories such as group A and Super Touring which allowed both Japanese and foreign built cars. Tom's Toyota's were competing against the likes of BMW, Honda, Nissan, Isuzu. Most were factory sponsored and a few were not. There was still some serious competition. Tom's: Tachi Oiwa Motor Sports was founded in 1974 by Nobuide Tachi ad Kiyoshi Oiwa. The pair were able to use TRD with very good results in tuning and modifications to the car and a good long term R&D program with Toyota. As a result of this they were able to go racing with fac- tory sponsorship winning championships in various categories.

Book Author(s)
Harry V Sucher, Tim Pickering, Liam Diamond and Harry Havelin
Review Author
Ben Guenther
Published on
Company
Veloce Publishing
MSRP
$50.00

This book was first published by Panther Publishing in 2011 and Veloce Publishing Limited did a facsimile reprint in February 2018, this review is about the reprint. What we have is a biography of Charles B. Franklin, an electrical engineer, motorcycle racer, designer of Indian motorcycles and an overseer of the Indian Company racing teams. This book extensively covers the years from 1903 thru 1932 and with a wide geographic expanse well, from Ireland to Britain, then Europe and America with side excursions to Australia and back to Europe. A comprehensive account of his life and achievements to the sport of motorcycling has not been available until now.

Review Author
Ben Morton
Published on
Company
Brengun
Hauler
Scale
1/144
MSRP
$11.86

Longtime readers of IPMS/USA reviews will know that I tend to prefer the tiny stuff. So it shouldn't come as too big a surprise that when Brengun released some accessory items for those of us that build in a diminutive scale (1:144) that I put in my bid for this kit review. 'Kit Review' may be too strong a phrase as these small German Staff Cars 3D printed, in resin, and come as one piece. The only assembly of the actual car is to remove it from the casting block. It should be noted that these cars represent an Opel Admiral Cabriolet, circa 1938.

Review Author
Jim Stepanek
Published on
Company
Hasegawa
Scale
1/24
MSRP
$44.95

This is a review of the Hasegawa Mitsubishi Colt Galant GTO-MR.

Engine

No engine. It’s curbside kit.

Interior

Interior is wonderfully engraved and the supplied upholstery decals fit well. Didn’t even have to paint some of the parts.

Body

Body was crisp and clean with no flash. I had hoped to just polish the plastic but there were swirls in the roof so it had to be primed and painted. I used Tru-Color sun orange which is pretty darn close to factory color.

Chassis

The suspension parts are separate from the chassis pan as is the exhaust system. Some of the parts are pretty small and care must be taken when working with them.

Instructions

The instructions are several pages long with suggested paint color for specific parts.

This was a very enjoyable kit to work on. Thank you to IPMS for allowing me to review this kit.