Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Rod Lees
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$14.95

First, the usual “THANK YOU!” to Ross at SAC for providing IPMS USA this review set. Said it before and will again, it’s companies like SAC supporting us that keep the hobby interesting and viable. And thanks to the leadership at IPMS USA from me for allowing an old guy, once again, to babble on about a great product, which was graciously provided for my use… Steve, Dick, Paul, and the rest, you are doing a great job.

SAC metal gear – what can you say? Perfection is a good starting point. This set is intended to be a total, drop-in replacement for the kit plastic. You get all three main gear, nose and wing mounted, and associated actuating cylinders. The detail is as good as the real thing, and the strength of the new gear is truly appreciated.

Review Author
Rod Lees
Published on
Company
Hasegawa
Scale
1/16
MSRP
$189.99

Our usual “THANK YOU!” goes out to our friends at Hasegawa USA, which provided IPMS USA with yet another of the prolific output from Hasegawa. We sincerely appreciate and value your continuing support!

First off, this is a very unusual kit. Back in the 1980’s, Hasegawa released a Wright flier, a Fokker DR-1, and a Sopwith camel in 1/8th scale. These were wood and plastic kits, requiring a lot of building skill and time, and resulted in a large, functional model. They currently sell for over $1000 U.S. on our local internet sales sites. This new Hasegawa Sopwith Camel, however, is not that kit.

Review Author
Marc K. Blackburn
Published on
Company
Dragon Models
Scale
1/72
MSRP
$19.95

From 1940 until the end of the Second World War, the Long Range Desert Group (LRDG) provided stealthy reconnaissance patrols in Western Europe and North Africa. The vehicle most commonly associated with these groups, particularly when they were in North Africa, is the Chevrolet truck depicted in this kit. Captured weapons were often used and, in this case, we have a 2cm Italian Breda cannon.

The kit is composed of 72 parts on three sprues of soft grey plastic and one decal sheet. The parts are fragile, especially the 2cm Breda cannon, so care should be taken when removing them from the sprue. There’s a color profile and decals for two vehicles.

Review Author
Tom Moon
Published on
Company
Round 2 Models
Scale
1/25
MSRP
$29.99

The 1967 Shelby GT-350 Mustang was not your average Mustang. It was powered by the Ford High Performance 289 engine and many special improvements. However, since this version was intended to be a production car and to be purchased by the general public, it included the Deluxe Mustang Interior, power brakes, power steering, optional air-conditioning, and optional automatic transmission.

Even so, its performance was superior for its time:

Review Author
Roger Rasor
Published on
Company
Eduard
Scale
1/32
MSRP
$9.95

Eduard now offers a mask set for Cyber Hobby’s recently released Bf-109E-3 kit. The set provides multiple pieces for masking the clear parts and wheels. Like other Eduard mask sets, it is made of Kabuki tape (similar to Tamiya’s masking tape) and provides precut masks for the kit’s windscreen, canopy, and wheels. The masks will adhere well to any flat or curved surface, so masking is easily accomplished and the masks can be removed after paining is completed. A simple instruction sheet is included to guide the masking process. This set should make masking most parts and painting a reasonably quick process with little or no drama.