In the Box and Molding Quality

Atlantis Models has re-released the classic Aurora 1:8 scale Blue Knight of Milan figure kit, which originally appeared in 1958. As the current owner of the Aurora trademark, Atlantis included the original box art and period instructions. The kit comprises approximately 35 parts molded in a metallic blue styrene, spread across several sprues, along with the traditional small red feather plume. The molding quality is generally good. Minor flash was present, primarily along the parting lines, but was easily removed during part preparation. Ejector pin marks were either absent or located in areas that would be hidden after assembly.

It doesn’t matter if you are scratch building, converting, or just adding detail to a military vehicle model, you need scale nuts and bolts. Sometimes, you need a lot of them. I have tried just about every technique for making bolt heads with varying success. Salami slicing hex rods resulted in varying thickness and sloping bolt heads. Chiseling off Styrene bolt heads works; but it is difficult to keep them level. I’ve found it nearly impossible to properly position resin nuts and bolts regardless of the type of CA used. So, I was thrilled to get an RP Toolz Hexagonal Punch and Die Set. This tool allows you to punch bolt heads from Styrene strips resulting in perfectly uniform thickness.

Here’s a review coming to you from all around the United States! It turns out that this set toured the US for a year before actually arriving at my doorstep. Seems our Postal Service just couldn’t chock the wheels of that truck…So I was extremely happy and surprised to receive this Wheelliant product.

On initial inspection the detail looks like it will show well in close-up photography. In addition to the diamond pattern on the chocks the lateral lines are very finally crafted and show no signs of residual material in the grooves so they look very crisp.

Turning over the info card you’ll get a surprise, a large set of instructions that’s easy to follow and red as it’s not printed in size 2 font like many are prone to. I thought this was a definite benefit, no matter how simple it seems as so many other manufacturer’s are including no instructions these days.