If you want to add some neat detail to your Eduard Bf-109F you may want to consider leaving off the prop spinner and exposing the propeller hub assembly. This certainly will add visual interest and add to any aircraft maintenance diorama.

Packaged in a blister package, protected by foam inserts, these seven light grey resin pieces are all that you need to do it. A small fret of two photo etch circular rings are included. The resin is blemish free. One of the pieces is an alignment tool to aid in drilling the centering hole and also setting the proper pitch angle.

This set is nearly identical to the EARLY version. The only difference is the propeller blades themselves. This set replicates the VDM 9-12010 type of blade which is slightly larger than the earlier VDM 9-11207. This type was typically found on the Bf-109F-4.

Packaged inside of the traditional blister pack with foam protection are seven beautifully cast light grey resin pieces and one fret of photo etch.

The resin pieces all feature beautiful surface detail including the stitching on the fabric portions. Other than cutting the parts from the pour blocks there is no other cutting required on the kit. se parts are drop in replacements for the kit items. y feature finer details and the addition of photo etch thin trim tabs. On the tail surfaces you have the option to cut off the molded on resin trim tab you can replace it with a photo etch one or leave the resin ones in place. I elected to leave them on for the tail. ones on the aileron fit perfectly and were attached with superglue.

The other thing is that the ailerons have a more robust attachment point for the mass weight. That is the little dangly thing on the bottom of the aileron. Eduard gives you three just in case you let the carpet monster eat one.

This product includes two photo etch sheets for the Eduard FW0-190A/F kit. One is the previously described SS589 sheet, and the other is a different detail set, #73-589, which provides some exterior details, such as bomb fins, as well as some wheel well details and a part for the landing gear. If you get this set, you don’t need #SS589, as it is included here. This one is recommended if you want to add interior detail to your model.