Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$10.43

The Jeep

The original Jeep was built by Bantam, but Ford and Willys also bid on the original contract. Due to financial problems at Bantam, the other two companies were given contracts to build Jeeps. Bantam called theirs BRC-40 Willys was the MB, the Ford was called GPW. The Jeep was a ¼ ton all-wheel drive vehicle, with a wheelbase of 80 inches and a track of 47 inches.

Willys produced 363,000 Jeeps, Ford made 280,000. We gave 51,000 to the Russians. They were used in every theater of WW2.

The Kit

The base kit is one very nicely cast piece of resin, which is almost the entire Jeep. There is a PE fret, of which 3 parts are used. There’s a decal sheet with all the markings you need. You get enough in the envelope to build two Jeeps, with PE and decals for both.

Review Author
Paul R. Brown
Published on
Company
Scale Aircraft Conversions
Scale
1/72
MSRP
$14.95

Earlier this year Zvezda released a new kit of the MiG-29 (9-13), known as the Fulcrum C under the NATO naming standards. The kit has since also been released under the Revell label. Scale Aircraft Conversions released a replacement set for this MiG-29 kit. The set is comprised of five parts, two main landing gear legs, a two piece nose strut, and the nose strut retraction actuator. The two side braces on the lower part of the nose gear strut are well molded but will require care in removing them from the casting tree as they are easy to bend since they are so thin.

Review Author
Paul R. Brown
Published on
Company
Scale Aircraft Conversions
Scale
1/72
MSRP
$14.95

Shortly after Trumpeter released its new Su-33 Flanker D kit, Scale Aircraft Conversions released a replacement set for the kit landing gear. The set is comprised of five parts: two main landing gear legs, the nose strut, the nose strut retraction actuator, and the scissor link for the nose gear strut.

As with Scale Aircraft’s other sets, the parts are drop in replacements for the kit parts. After removing a slight molding seam on the parts, I polished them using a wire wheel in my battery operated Dremel tool at low speed. This works very well and results in a nice uniform finish to all of the parts.

Book Author(s)
David Doyle
Review Author
Frank Landrus
Published on
Company
Squadron Signal Publications
MSRP
$19.95

David Doyle’s latest book continues to expand on Squadron Signal’s long standing In Action series that initiated back in 1971. This is a completely updated and expanded edition over Squadron’s earlier Armor in Action 34, M3 Half-Track by Jim Mesko that was published in 1996 with 50 pages.

Review Author
Keith Gervasi
Published on
Company
Italeri
Scale
1/72
MSRP
$29.99

History

Created to replace the piston-engined B-26 Invader, the twin jet engine tactical bomber B-57 Canberra was produced by US aircraft company Martin in the 1950s. Derived from the British aircraft EE Canberra it was produced in several versions to perform not only bombing but recon, electronic warfare, ground attack and dive bombing duties. The B-57B, developed for bombing missions, was the main version produced. It was characterized by the adoption of a new cockpit with two crew members arranged in tandem and under-wing hardpoints able to be armed with a wide range of weapons. The first units produced were armed with eight 12.7mm machine guns installed within the wings and later substituted with four 20mm cannons.