Brief History

Manufactured by the Stoewer Company, as well as BMW and Hanomag since 1936, the light uniform all-road car (leichten gelande Einhets Personen-Kraftwagen) possessed all-wheel drive, independent suspension, and a simplified open body. This particular body, the Kfz.2, was a three-seat communication car with a Torn. Fu.b1 radio set.

The Kit

The kit consists of 5 styrene sprues, one clear sprue, and a small sheet of decals that represent the four featured schemes in the kit. Construction begins with the chassis, and over the course of the first thirteen assembly steps, you’ve handled 45 parts. Everything goes together pretty smoothly however.

The next thirteen steps have you assembling the engine and inserting it onto the chassis. It builds into quite a nice little kit all itself. Following that, we move onto the floor of the car, adding the fuel tank, bracket, rear reflector, and fuel tank nozzle. This is then added to the chassis.

When this first came up for review, I’ll admit I never heard of this plane or company which is intriguing. A little quick research and I found that this was one of the first Russian monoplanes and it had an interesting difference with many planes - no ailerons. The ends of the wing bias because of their tether tension control wiring. That was enough for me. Omega Models located in the Czech Republic makes limited run resin models of lesser known subject. This kit comes in cream colored resin in 23 pieces with decals, instructions and a length of wire.

My first action was to wash the parts with dish detergent to remove any mold release and let dry. Next, I separated the parts from casting blocks and sanded down the minimal seam lines. All this prep work is critical as finding paint not sticking or a seam line later is much harder to fix.

One thing I find very refreshing amongst the modeling community is some of the ideas that come out and this one caught my attention immediately- a dog and his (or her?) doghouse. The set is very simple and comes as five parts. The doghouse is cast as one piece and the roof is separate. The dog, a burn drum and a milk container also come. All are cast perfectly and the only preparation was washing the parts and removing the casting blocks.