In Part One, I alluded to some issues I had with the windows in the kit so I’ll start with that. The portholes had acetate to represent the glass, which turned out to be larger than the flat spots they were intended to nestle into, so most had to be trimmed down. The same needed to be done for the ones that were in the deck.
Although the deck is meant to be screwed down, I elected to glue it as well, and discovered a section on each side of the deck that had flash which I hadn’t caught, and I paid for that by having to remove a glued-up deck just for that purpose, but in the end it turned out OK. Word to the wise: make sure that’s cleaned up before putting the deck on.