The Lockheed C-130A through H model aircraft are powered by a series of Allison T-56 engines driving a set of Hamilton-Standard 4-bladed props. The 4-bladed Hamilton-Standard props were original equipment on the C-130B through the C-130H models, and the props were later retrofitted to C-130A aircraft. Each C-130B through C-130H engine is housed in a nacelle that is slightly longer than the nacelles on the C-130A aircraft. The difference can be seen in a side-by-side comparison of the Italeri kit nacelles (designed for the C-130A) and this aftermarket kit.

Introduction

In 2020, Italeri re-released their big 1/72nd scale B-52H Stratofortress as kit number 1442. This kit is a re-box of the B-52H kit #1262 from 2006 with new decals representing three different aircraft from around the 1979 - 1981 time frame. In 1980, Strategic Air Command (SAC) was still in charge of the nuclear bomber and ballistic missile forces, the B-52Hs had only been in service for 20 years and Boeing’s AGM-86 Air Launched Cruise Missiles (ALCM) were into full rate production. This new-old kit brings markings for three new versions of the B-52H for modeler’s that can’t get enough of this great old bird.

A sincere thank you to Italeri for re-issuing this kit in tribute to the mightiest and most recognized (most feared in many places) of military aircraft.

Aerobonus continues to release pilot figures to staff planes in 1/48^th and 1/32^nd scale with the pilots seated in the appropriate seats. This latest release features two German Luftwaffe pilots for the Revell 1/32^nd scale IDS Tornado. The hand position is different on the two figures with one in pilot stance and the second in a different stance. Molding is superb with no bubbles or casting issues.

From Italeri: The Tornado Gr.4 arose from a collaborative project between Italy, Germany, and the United Kingdom for the production of a multi-role high-performance combat aircraft. The primary requirement, however, was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado IDS (Interdictor / strike) was the first version to be released by the British Royal Air Force and designated GR.1. In 1996 the Tornado was upgraded to the Gr.4 standard which was characterized by improved operational capabilities, new avionics systems for navigation and the adoption of new ‘on-board’ technologies. These systems enabled the effective identification and tracking of targets, and also the weapons management of the newer generation of weapons such as Paveway IV bombs and Storm Shadow cruise missiles.

Aires Models from the Czech Republic specializes in aftermarket details; for the most part releasing drop-in resin replacement parts.

This set is intended to replace the wheels of the 1/48 Eduard Spitfire Mk. IX. The parts are molded in grey resin, free of bubbles or imperfections and with great surface detail, down to the manufacturer of the tires molded with enough raised detail that will take dry-brushing fantastically!

The attachment points of the wheels to the casting blocks are miniscule and removal and clean up should be an easy task.

In addition to the resin parts, they include painting masks which are super-handy to have and use. The masks are pre-cut so it is as simple as peeling, placing and you are ready to airbrush.

Highly recommended.

I would like to thank Aires Models and IPMS/USA for the review sample.