Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
David Wrinkle
Published on
Company
Quickboost
Scale
1/48
MSRP
$6.50

Upfront, I want to thank Aires and Quickboost for providing these fine aftermarket bits for our beloved models and to the IPMS USA a big thank you for allowing me to review this Quickboost product.

Admittedly I am proud of the fact I love the stubby World War II fighter. The Rita, Buffalo and certainly the Grumman Wildcat. I have several in my stash including the Hobby Boss 1/48 wildcat and it’s a good looking kit. I snagged the Quickboost exhaust stubs for the wildcat before even looking at the plastic parts. In all honesty, when I finally looked at the original parts, I didn’t think you could improve on them. I was wrong! The original parts are well molded and due to the large diameter exhaust, even the kit parts have an open exhaust. NO need to drill out the opening. Well, where I think the Quickboost parts shine, is the fact the wall thickness is more in line with a scale thickness. The original kit parts are certainly way too thick.

Review Author
Jim Pearsall
Published on
Company
Eduard
Scale
1/72
MSRP
$14.95

This nifty add on for the Eduard Weekend Bf-110G-4 is mostly for the cockpit, although there are a couple of other parts which made my life easier. The Bf-100G-4 is reviewed here: Eduard Bf-110g-4 weekend kit The ProfiPACK kit comes with the Photoetch.

The cockpit details include better rudder pedals, instrument panels for the front two positions, gun sights for the rear gunner’s position, a new woven seat for the radar operator, seat belts, and throttles. Additionally for outside the cockpit, there are little screens for the intake side of the exhausts, a loop for the antenna on the canopy, the L shaped scissors on the rear of the landing gear legs, and an antenna for under the fuselage.

Review Author
Jim Pearsall
Published on
Company
Eduard
Scale
1/72
MSRP
$9.95

This is the canopy mask for the Eduard 1/72 Bf-110G-4 Night fighter. It’s recommended for the Weekend kit, which is reviewed here: Eduard Bf-110g-4 weekend kit The ProfiPACK kit comes with the mask.

You get the mask and a very good set of instructions.

The mask is die cut on Kabuki tape, nice and thin and it sticks marvelously.

I have one trick. It’s very hard to see the edges of the mask items when they’re on the backing sheet. I slather on a tiny bit of acrylic black, like what’s used for weathering, and it picks out the edges nicely.

Review Author
Jim Pearsall
Published on
Company
Eduard
Scale
1/72
MSRP
$22.95

The Eduard Weekend kits are designed for a fairly quick and easy build, but as I proceeded through this project it took me much longer than a single weekend. The build was more like four weeks, working an hour or so each day. When it was time to write this review, I checked the catalog at Eduard, and it says that the kit doesn’t include masks or PE. But the mask and PE were in the box when I opened it!! Dave Morrissette was patient with my query. I got the PE and mask in the box, but they are for separate reviews. So look for the reviews elsewhere on the IPMS/USA reviews page.

Review Author
Mark Aldrich
Published on
Company
Meng Model
Scale
1/35
MSRP
$64.99

Achzarit – (“Cruel” in Hebrew with female inflection) is the name given to one of the IDF’s newer Armored Personnel Carriers. The other is Namer and based on the Merkava Chassis. The Achzarit is based on the Russian T-54/55 chassis that the IDF captured so many of in the previous wars with her neighboring Nations. No matter what name the IDF gave it, it could not describe near perfection. The Israelis are the ONLY Nation that has ever put crew protection and survivability forefront in the design of armored vehicles. The Achzarit is referred to as a heavy APC and rightfully so. It weighs in at 44 tons and is designed to transport the troops into combat and also survive confrontations in urban scenarios. It carries a dismount squad of nine and three vehicle crew members. It mounts three 7.62 FN Mags and another FN Mag mounted in a Rafael OWS for the vehicle commander.