Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
David Wrinkle
Published on
Company
Quickboost
Scale
1/48
MSRP
$6.50

Upfront, I want to thank Aires and Quickboost for providing these fine aftermarket bits for our beloved models and to the IPMS USA a big thank you for allowing me to review this Quickboost product.

Admittedly I am proud of the fact I love the stubby World War II fighter. The Rita, Buffalo and certainly the Grumman Wildcat. I have several in my stash including the Hobby Boss and Tamiya 1/48 F4F-4 Wildcats kits.

I snagged the Quickboost pitots for the Wildcat before even looking closely at the pitot tubes. Both kits are F4F-4’s and thus use the stubby angled pitot tube mounted near the port wingtip. No problem here, Quickboost provides both the angled pitot found on the F4F-4 as well as the longer straight version found on the F4F-3’s. Just a quick look at the comparison photos you will see the resin replacement parts are much less bulky and more defined than the stock parts. Unfortunately I don’t have a F4F-3 to compare the longer style pitot.

Review Author
Andrew Fuller
Published on
Company
Revell
Scale
1/48
MSRP
$17.00

Manufactured by Mitsubishi Heavy Industries, the A6M5 Zero was a long range fighter aircraft flown by the Imperial Japanese Naval Air Service. Its first flight was on April 1st 1939 and entered service on July 1st 1940. More than ten thousand Zero aircraft were built.

Revell brings us another easy and fun to build kit. Being a skill level 2 kit, detail is a bit sparse in the cockpit department. It consists of only a pilot figure and a decaled instrument panel. Regardless, of the lean detail, this is a great little kit. The Zero is moulded in grey, and panel lines and detair are raised.

The kit went together nicely, and the fit of all parts were very precise. Other than some very minor "flash"on a few of the parts, the only predicament I encountered were the 4 small locating tabs on the bottom of the canopy. These locating tabes had to be removed to ensure the canopy had a flush fit with the fuselage.

Review Author
Rob Benson
Published on
Company
HK Models Co.
Scale
1/32
MSRP
$95.00

Mr. Neil Yan and the wonderful folks at HK Models deserve tremendous thanks for providing this review kit. I appreciate their work to bring new and unusual subjects to the scale modeling community. The IPMS/USA Reviewer Corps also deserves thanks for giving me the kit to review. I am only one member of a large staff in the Reviewer Corps, and I appreciate all the tireless team and individual work that goes into getting the material out to be reviewed and the finished write-ups published.

The Meteor appeared late in WW2 as a counter to the V-1 threat to England. It was the first operational Allied jet fighter, operated primarily by the RAF throughout its history. The design of the Meteor might seem primitive by today’s standards, but it truly was groundbreaking at the time. Many versions of the Meteor were developed, including stints as turboprop and ejection-seat test beds. HK Models chose the MK 4 version for their new kit.

Review Author
Marc K. Blackburn
Published on
Company
Aoshima
Scale
1/72
MSRP
$29.89

Aoshima has released a number of vehicles of Japanese Ground Self Defense Force (JGSDF), including this little gem. I don’t know anything about the ground equipment of the JGSDF, but this is what’s included as a description, “JGSDF 31/2 ton Fuel truck is mainly assigned to Logistic Support Regiment, utilized for fuel supply to tanks, armored vehicles, and other various vehicles in the field. It has “Ki” (danger) marking just like civilian vehicles.” This is one of a series of service vehicles in the JGSF that Aoshima offers in 1/72 scale.

Review Author
Andrew Birkbeck
Published on
Company
Meng Model
Scale
1/35
MSRP
$89.95

Following on from their superb yet diminutive FT-17 WW1 French tank, Meng Models of China provides the modeling public with a colossus of a tank model, the French Char 2C. Like the FT-17, the Char 2C was born during the years of battle in World War One, but came too late in the piece to see combat. Before the prototype was even completed, an order was placed for 300 of these gargantuan beasts, but due to the war coming to an end, this order was subsequently cancelled, and only 10 Char 2C’s were eventually delivered in 1921, becoming the largest tank ever to enter service in any of the world’s armies. The 10 vehicles went on to become mainly propaganda vehicles, “staring” in various cinematic productions to show the strength of the French military machine. Each of the ten tanks was named after the ancient regions of France: Poitou, Provence, Picardie, Alsace, Bretagne, Touraine, Anjou, Normandie, Berry and Champagne. Normandie was renamed Lorraine in 1939.