The landing lights under the wings on the MiG-21 is quite a visible feature. The Eduard kit has you just add a plastic piece over the area. It may be adequate for some but for others it will just beckon those to detail it. Enter the Quickboost set.

Two resin blocks are included. One is crystal clear with outer part of the light and then the other part is a very tiny filament part. It is as realistic as the real thing. The other resin block is molded in light grey resin. This is the housing for the light. Just paint this part gloss silver, add the filament and you will have a perfectly realistic landing light housing.

Highly recommended

Thanks to Aires and IPMS/USA for the review copy. You can get yours directly from Aires at www.aires.com or at your local hobby shop or online retailer.

The MiG-19PM is the missile version of the short lived MiG-19 family. The PM had four pylons which allowed the aircraft to fire beam riding AA-1 missiles.

This set is packaged in a Ziploc bag. There are five parts in the package. The large pitot tube is beautifully rendered out of turned aluminum. There are four turned brass missile rails that are designed to fit on the front of the missile pylons. These will hang out the end of the pylons so you know they will break off during handling, unless you replace them with these metal extensions.

So you have an easy to install upgrade for a reasonable price. This simple and effective upgrade offers strength and perfectly round cross section with minimal work. What more can you ask for? The set is indicative of the quality that I’ve come to expect from Master. Another winning product.

Highly recommended

Thanks to Master and IPMS/USA for the review copy.

Master Model continues to “turn” out metal details for the model maker. Here they are offering the static discharge whips that you see on all high performance Eastern Bloc built jets. You know - the ones on the trailing edge of the wings and tail surfaces that, if they are molded, quickly snap off never to be seen again. Plus molded discharge whips are often out of scale. Previously I stretched sprue and then quickly exposed the tip of the rod to heat to cause it to mushroom slightly. This is a good solution except the whips always were too big and quickly snapped of at the slightest touch.