Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Pablo Bauleo
Published on
Company
Dragon Models
Scale
1/350
MSRP
$64.00

Dragon continues to expand its “Modern Sea Power” Series, this time with the introduction of the 1/350 Zerstorer Class 1936A, with a twin 150 mm turrets.

Upon opening the box you find 18 sprues, plus two small photoetch frets and decals. There is a total of over 550 parts on this kit.

The parts are finely molded, with virtually no flash anywhere. I’ve only was able to spot a bit of flash in one sprue, around the propellers. Slide mold technology was used extensively in the kit minimizing seams and allowing multiple pieces (bridge, hull) to be molded in a single piece. It should be noted it the hull is packed with a small protector to protect the sharp bow from being damaged.

Review Author
Jeff Leiby
Published on
Company
Dragon Models
Scale
1/35
MSRP
$72.99

The Kit

The 57-ton M6 was designed as a tank able to respond to Germany’s all-dominating Panzers that had previously swept through Europe in the Blitzkrieg, and approval to produce four prototypes was given in February 1941. The type proved unsatisfactory in testing, however, and in the end only eight M6, twelve M6A1 and 20 M6A2 tanks were built by Baldwin from 1942-44. The M6 had a crew of six and was armed with an M7 76mm gun, M6 37mm gun and no less than five machine guns. The M6 was distinguished by its cast hull. (From Dragon USA website).

The parts for the M6/M6A1 kits are completely new molds and carry-over no parts from Dragon’s previous M4-family of Sherman kits. You will find the following inside the box:

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$16.50

This is another of those Brengun kits that is SO useful when doing a diorama. In this case, the diorama is a USN aircraft carrier deck, and the kit is the MD-3 tow tractor. Actually, the kit is TWO MD-3 tow tractors. Better value for the money.

While I was looking up the catalog reference for this kit, I found another useful item in the Brengun accessories catalog. How about a tow bar for this tractor? It’s item number BRL144115, $6.05.

The Kit

You get two of all the parts. There are two sets of resin parts to make two tractors. Also, the PE fret has all the (tiny) parts you need to make two tractors. The decal sheet has enough decals to make two tractors, as long as you don’t want the black warning stripes for the bumpers on the second kit.

All of the resin parts are nicely molded, without bubbles or excessive flash. The PE parts were nicely set up, with almost no trimming required on any of the parts.

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$4.50

Brengun has been producing some interesting PE accessories to dress up the area around your model. I’ve seen examples of this type of container, lots of them. All painted Caterpillar yellow, in East Peoria, Illinois.

The steel container is a standard item around any industrial plant. They’re used to hold parts, subassemblies, junk, recyclable materials, and anything else that needs storage around the plant. They’re usually stackable, about 2 or 3 high, and can be moved with a forklift or overhead crane. The boxes are tough, almost indestructible. Almost.

The Kit

You get enough parts to make 4 steel containers. Each one consists of the box body and 4 corner legs/supports. The instructions don’t match up with the boxes. There’s only one fold required for each side.

Construction

The PE parts are nicely set up and laid out to allow each container to be separated from the fret, and then each of the 4 corner pieces to be removed.

Review Author
Mark Aldrich
Published on
Company
Dragon Models
Scale
1/35
MSRP
$59.99

The M270 MLRS (Multiple Launch Rocket System) was first delivered to troops in 1983 and has since been delivered to many NATO countries with over 1,300 being built. The last M270 was manufactured in 2003, when a last batch was delivered to the Egyptian Army.

DML first produced a MLRS kit in 1992. The kit was no. 3522 followed soon after by no. 3523. The major difference was the inclusion of 2 separate M26 rocket pods. Jump to 2015 and Dragon has released a “new” version of this incredible artillery piece.

In 1992, the kit suffered from several issues such as the link length track, poorly rendered road wheels, and attached support arms and shocks. This new release has not rectified any of the issues. The only difference between this kit and no. 3523 is the inclusion of three small part sprues. Do not expect “Big Foot” track as depicted on the box top. This re-issue still has the earlier style track.