Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Rob Benson
Published on
Company
Airscale Model Aircraft Enhancements
Scale
1/48
MSRP
$11.99

Thank you Airscale Model Aircraft Enhancements for sending these excellent decals for review. Thank you to the IPMS Reviewer Corps for letting me review them! I am honored to contribute back to the scale-modeling community.

Airscale Model Aircraft Enhancements’ tagline is “High resolution cockpit detailing for aircraft modellers” and this decal sheet is an excellent example of their philosophy. A compact 3 1/16 x 2 1/8 inch (54 x 80 mm) sheet is richly populated with a wide variety of high-resolution modern jet aircraft data plates and warnings. All decals have minimal carrier film.

Review Author
Charles Landrum
Published on
Company
Master Model
Scale
1/48
MSRP
$5.00

Master Model continues to provide delicate turned metal parts which not only provide greater detail closer to scale, but in the case of pitot tubes, are far more resilient during handling. For the modeler who chooses to take a model to a show or club meeting, indestructability is a consideration during the modeling process.

The MPM/Special Hobby 1/48 L-39 Albatros is back on the market after a long hiatus. The kit provides the aircraft’s two pitot tubes as separate moldings which are then glued to the leading edge of the wing. The pitot tubes are rather non-descript and require clean up to use. Master Model fortunately has released this set of two tubes as replacements. These are nicely turned pieces with all of the subtlety of the real tube. To use them, the modeler just needs to drill a hole in the wing after assembly of the wing and slide the tubes into the hole when the model is finished. There is plenty of base stock for attachment to the wing.

Review Author
Charles Landrum
Published on
Company
Master Model
Scale
1/48
MSRP
$5.00

Master Model continues to provide delicate turned metal parts which not only provide greater detail closer to scale, but in the case of pitot tubes, are far more resilient during handling. For the modeler who chooses to take a model to a show or club meeting, indestructability is a consideration during the modeling process.

Review Author
Paul R. Brown
Published on
Company
Scale Aircraft Conversions
Scale
1/72
MSRP
$12.95

This set is provides replacement gear for either the Hasegawa or the Fujimi A-4 kits. As I had a number of the Fujimi A-4 kits, I selected the TA-4J kit for installation. In comparing the metal parts to the kit parts, the set includes two different nose gear struts; one matches the Fujimi strut, so presumably the other is intended for the Hasegawa kit.

Review Author
Dave Morrissette
Published on
Company
Eduard
Scale
1/32
MSRP
$7.95

A little background. The LMG Model MG 14/17 machine gun was a 7.92mm gun used on aircraft and Zeppelin in WWI. The 17 designation means that the gun was the 1917 version of this particular weapon. MG-14/17's were used very widely on German multi-seat aircraft throughout 1917 and 1918, particularly as the weapon for the rear gunner/observer on two seat planes.

Eduard has produced a resin and photoetch replacement for kit parts representing this gun. Inside the package, you get parts for two guns. The resin parts consist of the stock, the gun itself, the ammo drum and the sight. The photoetch parts consist of the gun sight, handle, the sides of the ammo drum, the supports for the gun sight and the trigger assembly.