Right front low

StuG.III Ausf.G, Dec 1943 Production

Front

Piranha Super Spy Car

2

Nebelwerfer 41 Towed German Rocket Launcher

Cockpit - Comparison of Seat Belts

Bf-109G Royal Class

Sprue Detail

Opel Blitzbus Ludewig “Aero” - WWII Service

Pilot and RIO Installed

USMC F-4J Phantom II "VMFA-333 Fighting Shamrocks", Part 2

Left Side with Sidewinder

USMC F/A 18D

Completed

DG-1000S Glider AKVY

Finished model

Avia B.534 Late Model

Misc Image 2

StuG.III Ausf.G, Part 2

Previous Next

Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Parts Packaging

MiG-21U, US, UM Pitot Tube
Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$7.99

The two-seat MiG-21U, US, and UM family each has a uniquely shaped pitot tube with guide vanes. Master Model represents this pitot tube quite accurately.

This set comes with two turned metal barrels and a fret of six vanes. You only need four vanes. The metal barrels are designed to be slipped into each other. The absolute crazy thing is the small mounting holes for the vanes that are drilled in the outer metal barrel.

The instructions recommend that you add the outer portion with the vanes after the model is completed to avoid damage. Sounds like good advice. The vanes are very small. Foresight is appreciated – Master Model includes two extra vanes just in case the carpet monster needs to be fed.

Master Model produces the best pitot tubes in the industry. Between the strength and the scale thickness, you will immediately see the need for these pitot tubes on your MiG-21.

Highly recommended

Parts Packaging

MiG-21PF, PFM Pitot Tube
Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$7.99

The MiG-21PF and PFM are represented in model form by the Academy kit. This pitot tube is quite simple compared to some of the others in the MiG-21 family.

The set is simple in that it has a single turned metal barrel. The pitot tube is scale thickness, but the thing I like the best is additional strength of the brass tube. The instructions are quite basic and show the proper angle of the pitot tube in relation to the fuselage. A simple .6mm hole in the kit will prep the model for the turned metal pitot tube. Then, it is just as simple as inserting the pitot tube. Painting instructions are included.

This pitot tube is typical quality from Master Model. Its strength and scale thickness make this a required addition to your MiG. Just be careful you don’t poke yourself with the tubing.

Highly recommended

Thanks to Master Model for the review sample and IPMS/USA for the review opportunity.

Parts Packaging

MiG-21bis Pitot Tube
Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$7.99

The Eduard MiG-21bis is a very nice kit right out of the box; however, the pitot tube could be better. There are limitations that plastic can’t overcome, not even with the best injection molded technology. Even so, the pitot tube sticks out so far on the MiG-21 that it’s bound to be broken off in handling. Besides, you can get a scale thickness with brass that you couldn’t get any other way.

Parts Packaging

MG-131 Mount for the Fw-190D-9
Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$40.00

Designed for their Fw-190D-9, this beautiful upgrade set from Eduard is for those who want to show off the detail under the forward cowlings. Featuring six light and dark grey resin pieces, everything is perfectly formed and blemish free. The guns are hollowed out at the ends and the cooling slots are opened as well. There is also a small fret of photo etch that holds seven pieces of nickel plated parts – six cowl fasteners and one windscreen oil cleaning pipe. The oil cleaning pipe will require the most care, as it is very, very thin.

Decal Package

He-219 Uhu Decals
Review Author
Floyd S. Werner Jr.
Published on
Company
Eagle Editions Ltd.
Scale
1/48
MSRP
$15.50

The Tamiya He-219 is the standard for 1/48th scale models of this airplane. However, marking options have been a little sparse for this kit. Eagle Cal has released a new sheet that covers the three basic paint schemes seen on the Uhu. This set is released in conjunction the Eagle Cals 1/32nd scale decals covering the same aircraft. The 1/48th scale decals cover the A-0, A-7, and the A-2 versions. To build the A-0 and A-2 versions, the modeler would be advised to get the Vector resin conversion set, also available from Eagle Editions.