Since man’s first coordinated attempts to go airborne for the purposes of warfare (balloons used for artillery spotting in the Franco/Prussian War of 1871), opponents have speedily attempted to counter the aerial threat with ground based anti-aircraft weapons. And when the pace of war sped up, so the need for mobile AA weapons increased. During the opening phases of WW2, German ground forces enjoyed air superiority, and the need for mobile AA equipment was not a high priority. But by 1943, it became clear to German commanders that mobile AA weapons to keep pace with and offer protection for their mechanized units were required. Two existing tank chassis were used to provide the bulk of the Flakpanzer weapons, those being from the Panzer 38t and the Panzer IV vehicle series. The first Panzer IV chassis vehicle was the Mobelwagen, or “Moving Van,” initially mounting a quad 20mm Flak gun unit, but for the production series of vehicles, mounting a single barreled 37mm Flak 43.

This little set is designed as a drop-fit to replace the plastic machine gun barrels on any Italian 1/48 scale aircraft kit that was armed with the Breda 12.7mm machine guns.

Master Model provides a pair of gun barrels, each comprised of 2 pieces: a perforated jacket and the gun barrel itself. The brass is extremely cleanly cast, with full perforations in the jackets and a nice open muzzle on the barrels themselves. No cleanup of these parts will be required. The brief instructions show the barrels are to be inserted into the jackets, then placed onto the model in the appropriate location.

This fine metal pitot tube is from Master Model, based in Poland. For those of you who have never heard of the company, they produce finely machined gun barrels, pitot tubes, and the like for aircraft, and also have a great line of metal gun barrels for ships in all scales.

This particular part is a single milled pitot tube for the nose of the Trumpeter Su-27 or Su-30. Adding it to the kit requires nothing more than gluing it in place. I have included a picture comparing the kit piece to the Master Model piece and the Zactomodels piece. I have also added the Master Models pitot to my kit nose (which is the replacement nose from Chris Wilson and Zactomodels) – the fit is perfect.

Highly recommended! This is a great replacement for the kit part (much less clunky) and is stouter than the resin piece from Zactomodels. My thanks to Master Model and IPMS/USA for the chance to review it.

This book looks at the only enemy aircraft actually to drop bombs on the continental United States, the Kugisho E14Y “Glen”. We are given the history of its development and its technical details, as well as the details of the two bombing missions over the Oregon coast and other operations across the Pacific. It should be noted that the Japanese were the only nation to use submarine-based aircraft in any quantity.

This book begins with a discussion of the first Japanese experiments with submarine-based aircraft, as well as the aircraft preceding the E14Y in service. A nice overview of the E14Y follows, with discussions of its operations for the IJN. One thing of interest is the joint operations of both Japanese and German submarines from the base at Penang (part of modern Malaysia). It even appears that there was a possible exchange between the Axis powers with an E14Y being traded for an Arado Ar-196.

Kitty Hawk Models continues their great releases with an F-35B Lightning II. The F-35 is a development from the JSF (Joint Strike Fighter) program and is a short/vertical takeoff and landing plane with bomb, cannon, and missile capability. This version, the “B”, is designed for use by the US Marine Corps and various overseas navies. It does not include a tail hook or foldable wings like later versions.

The kit itself is in dark gray plastic with no flash and excellent panel lines. There are six sprues plus separate parts for the upper and lower fuselage and a forward cockpit piece. There is also an excellent clear sprue which is very thing and crisp. Last are two decal sheets and the instructions.

The Henschel Hs-129 was a purpose-built ground attack plane which was designed for destroying tanks and attacking enemy emplacements. It wielded several versions of a 30mm cannon and had an armored cockpit and engines to allow for close air support of troops.

Hasegawa has reissued its excellent Henschel Hs-129B-2 kit with the needed decals to make two winter camouflage schemes. The kit comes with nine gray sprues and a clear sprue and a new set of decals. There is also a small poly cap sprue which is used to hold the propellers onto the engine faces. The panel lines are great and the kit is flash free.

The Kit

The kit for the Cobra can only be built as a stock vehicle. Representing the first generation of Cobras, it’s very highly detailed, being a true representation of the full-size car. The instructions are easy to read and the drawings are well detailed. All parts are called out by number, and there is a paint scheme included for all the parts.

Eduard has given us several MiG-21 offerings, which allows us to build just about any MiG-21 in any country’s service. Right after their release of their MiG-21 in Czechoslovak service, they released this decal sheet that is just stencils in Czech. And there are a bunch of them. I started to count them, but gave up. There are 132 different stencils, and there are anywhere from two to eight of each of them. Markings are included for all of the pylons and external tanks, as well. Even though the markings are tiny, when you put them under magnification, they are readable. And, they are super-thin. You can barely see the carrier film.

A 5.7” x 8.2” placement chart is provided and it will cause you to go cross-eyed trying to follow the tiny lines and numbers. These are very high quality decals, and are highly recommended.

My thanks to Eduard for the review sample and IMPS/USA for the review opportunity.

One of my favorite aircraft to model is the MiG-21. The airplane was the most important fighter of the old Soviet Union for many years and was exported virtually around the world. The number of interesting color schemes abounds.

We have all seen a great number of reviews of impressive parts from Master Model and have purchased a few, so I jumped at the chance to review their new MiG-21 Pitot Tubes. The subject of this review is a solid, milled replacement for the plastic pitot tubes from Fishbed D and F models. These MiG-21 PF and PFM models were a part of the second generation Fishbeds and were widely exported.

The attached photo shows a comparison of the Master Models part against an old Airfix MiG-21 model. A day and night difference. The instruction sheet does a great job of showing how to modify the kit to accept the Master Model part, how to align the new part, and how to paint it.

Along with several other photo etch sets made for detailing the Kinetic EA-6B and A-6E kits, Eduard offers this wing fold enhancement. Though the kit detail of the wing fold is adequate, this set definitely fine tunes the whole mechanism and lends a lot of detail. All together, there are 66 pieces of photo etch detail, all of which must be folded at least once, most twice. Removal of four tabs and four hinges on each kit wing gets the process started. These are replaced with three dimensionally-etched hinges and rib detail which, when painted and dirtied up, will give a great depiction of the real thing. Each wing also gets a very delicate manifold and plumbing piece. All of these are etched in the light gauge steel that Eduard sometimes uses, so they are a little more stiff that the normal photo etch, which is great for this application.

My thanks to Eduard for the review sample.

Having built the Academy Special Edition 1/72 Helldiver a couple years ago, I jumped at the opportunity to review the new Cyber-Hobby Helldiver. The kit represents a slightly earlier Helldiver, with one of the most noticeable differences being the solid dive flaps. When the kit arrived, I was very impressed. The molding was well done, with crisp detail and no molding flaws. The kit is the high quality we have come to know from Dragon/Cyber-Hobby.

When I first heard this was coming out, I just couldn’t wait. It is such a unique and interesting piece of US military history, and personally one of my favorite tanks ever built. When it was announced that IPMS had received one for review, I was certain it would be requested instantly. Now, whether it was overlooked, or whether everyone simply wasn’t as eager as me to build this beast of a kit (or didn’t have the space to display it), it hadn’t been claimed. So I jumped at the chance to review it. Oh, what a build I was in for…

The Parts

Upon opening the box, the modeler will find two frets of detail parts, six vacuformed parts which assemble into the ruined building, and one part, the base, representing the street, sidewalk, and a small pile of rubble that fell from the building in the process of becoming…ruined.

The detail parts are injection molded. Included in the detail parts are parts for:

• A short length of wrought-iron fence (not shown on the box art)
• A street lamp (visible on the box art)
• A main door and framing parts for the door frame (visible on the box art)
• Set of window frames, window shutters, and framing materials for the windows

MiniArt usually includes detail parts that are generic in nature and can be added to other structures, or added to the simulated pile of debris on the base.