The Small Shop, the makers of the "Hold-n-Fold" photo-etch workstation, have added a new tool to their lineup, the "Standard Rolling Set".

This set comes with a milled aluminum base and a total of twelve rollers in metal and wood.

• Wood - 3/4", 5/8", 1/2", 7/16", 3/8", 5/16", 1/4" & 3/16"
• Steel - 0.125", .09375", .078" & .0625"

The milled base has a series of rounded cutouts that many of the smaller rollers will fit into. The base is not needed for the larger diameter rollers.

I was happy to see Hasegawa reissue these kits as I have several of the "Eggplanes" but not some of the re-releases. The kit comes in a sturdy top opening box - great for holding the parts as you work on the model. There are thirteen White, Eleven Black plastic parts and one crystal clear windshield and with a colorful decal sheet with the names of three different shuttles. The canopy is loose in the box allowing it to be scratched up a bit, but a little polishing and a dip in Future took care of that problem. Some of the parts were also scratched but nothing a little polishing and painting would take care of. One thing about these re-releases is that Hasegawa have eliminated the bases that were in the original issue. This kit no longer has the clear Blue half earth base and the wire to support the shuttle above it, see picture. Missing from the kit I received was the wire that goes from the shuttle bay load to the Astronaut that is shown in the instructions.