Osprey is a publishing house in the United Kingdom that should be familiar to most modelers, historians, and military history buffs. Osprey continues to expand their product line and one of their newest series is combat. The books examine the relative strengths and weaknesses of two adversaries across the historical timeline, from ancient empires to modern conflicts. This particular volume turns its attention to the Vietnam War. Rather than examine the entire conflict, this volume examines the critical years of 1967-68, through the eyes of the United States Marines and the North Vietnamese Army.

As with all Osprey series, regardless of the topic, they follow a particular format. For the combat series, the chapters are organized as follows:

Thank you to Unique Master Models (UMM) for generously providing an excellent tool for “field testing.” Thank you as well to the IPMS Reviewer Corps for letting me be an evaluator.

The gluing is a two-part aluminum block with 90-degree intersections. The two parts are screwed together with two flat-head machine screws on the smaller end. The whole unit is about 2 ¼ by 1 3/16 inches.

There are many uses for the jig. I used a simple frame assembly example to show how a complex joint could be quickly glued. Three parts were placed on the jig and one application of CA glue secured the assembly in one step. The first attempt was a failure, since glue was applied a little too heavily, with the assembly being firmly attached to the jig! But a light application of thicker CA worked well. I suggest waxing the interior jig surface a bit to reduce glue adhesion.

Hauler, a small company out of Czechoslovakia, continues to add to its list of quality aftermarket and modeling supply products; this time with a package of eight U.S. Army 75mm ammunition boxes in 1/35th scale.

The package contains a single baggie containing all the resin parts needed, mounted on backing blocks. Four of the boxes are empty with separate lids, with the other four made of solid resin. All contain fine wood grain and represent standard USA ammunition crates. Delicate ‘rope’ handles are included for all of the crates, but stencils and/or decals are not.

Thank you to Unique Master Models (UMM) for generously providing an excellent tool for “field testing.” Thank you as well to the IPMS Reviewer Corps for letting me be an evaluator.

The jig is akin to an adjustable protractor with a range of 0 to 180 degrees. The base plate is metallic blue metal with white, etched tick marks and numbers marked in 1 degree increments. A polished bar is screwed to the base plate at the zero position and an adjustable or positionable bar with a set screw can be locked between 0 and 180 degrees. Both plates are 3/16 in thick and project up from the base plate about 7/16 in. I checked the indicated angles on the jig with other tools and the angles match the precision of the jig, in other words, the angles on the jig are pretty darn good! The setscrew on the positionable plate held well and did not slip when the jig was dropped from about 5 feet onto a carpeted floor.

Cross & Cockade, International (CCI) is best known for its excellent assortment of books and publications covering “The Great War” in the air. The artwork in these publications is of the highest caliber and the writing is superb.

CCI also provides calendars and IPMS has just received the 2016 version of this annual calendar. Each page features artwork by a list of artists who produce inspiring views of a moment in time. Certainly, the artists should be identified, and WWI aficionados will most certainly recognize their names.

In alphabetical order: