One of the latest releases from Eduard in their rapidly expanding Brassin line are a set of late wheels intended for use on the new Tamiya F-14A (kit 61114). Consisting of eight resin parts along with a set of masks to aid in airbrushing the wheels and tires, the set can be used to dress up the appearance of the Tamiya kit, especially for modelers that like the representation of weight on their tires.

This set consists of resin main tires with separate inserts for the outer and inner wheels as well as front wheels, which are cast as single assemblies. The Tamiya kit provides main wheels that are molded as front and back halves, while the front wheels are molded as single pieces. Assembly and installation instructions are provided on the inside of a bi-folded sheet of paper that include the calling out of only two Gunze paint colors, Tire Black and White

Aires continues its releases with this excellent set to make the horizontal stabilizers moveable on Trumpeters 1/48^th scale F9F Panther. The set is comprises four perfectly molded parts with two for each side.

Casting is perfect and prep work takes about five minutes. Carefully cut the four parts free with a razor saw and then sand the edges smooth that were cut loose. They are already keyed to fit directly into the kit parts. A little clean up and they fit perfectly. One thing to note too, the set duplicates the kits surface detail very well with all the needed rivets. To finish, glue to the kit and angle the moveable parts to the same angle and paint.

This is a wonderful quick to add set from Aires and will give you kit more visual interest. Highly recommended

My thanks to Aires and IPMS/USA for the chance to review this great set.

The Kit

The kit comes in a fairly thin box that has a nice painting of a Coastal Command Wellington bombing a U boat. The scheme seen on the box is number one of the 6 choices that Italeri gives you. Upon opening the box you find a single bag of 5 gray sprues, and one clear sprue. Inside that bag is also a note saying that the kit was made in the Czech Republic. This kit is the MPM kit reboxed. Along with the sprues come a nice large instruction booklet and a very nice decal sheet by Cartograf. Under all that is an addendum to the instructions telling you step 6 is wrong for this version of the kit, and to use the updated parts for the exhaust. (The hedgehog exhaust of the original MPM kit were replaced by regular tubular exhausts.)