A nice addition to Scale Aircraft Conversions (SAC) already impressive array of aftermarket landing gear is the set for the F/A-18 A, B, C, and D. The parts are made of white metal and include three separate landing gear pieces, as well as a metal tree with two landing gear support pieces.

A few mold seams are apparent on the shock absorbers of both the main and the nose gear, but they can easily be sanded or scraped off carefully with an X-Acto knife. Be careful to not bend the soft metal when cleaning up the parts. Also, the molded plastic nose gear cover that comes in the Hasegawa kit will have to be glued to the metal. A touch of super glue does the trick.

Our good friend and supporter Abby Robey of Xuron supplied several new tools to us for review. Up first is this sprue cutter. Like all of Xuron’s tools, this is a finely crafted tool that will deliver years of service if properly used. That means plastic only – the fine cutting edges are shaped to deliver a near-flush cut on soft plastic – use them on metal and you’ll damage that edge.

I did a test cut on a standard sprue runner from the Eduard Spitfire I’m reviewing – take a look at the results in photo 3. Even on a relatively thick piece of styrene, the tool delivers a near-perpendicular cut through the runner. Moving on to “normal” usage, I removed one of the horizontal stabilizers from its tree – note (photo 4) that the resulting cut is almost perfectly flush. Cleaning up parts is my least favorite part of building; these cutters will reduce the magnitude of that tedious task. Highly recommended!

Osprey’s Campaign series of books is a well-established line covering some of the more famous campaigns in military history. The series started 29 years ago with the Normandy landings and with this installment, Smolensk 1943 being one of their latest releases.