Review Author
Joe Staudt
Published on
April 14, 2009
Company
J3 Models
Scale
1/24
MSRP
$4.95

Those of us that like to display our automotive models with the hood open generally face two problems. The first is, of course, having an accurate-looking hinge mechanism, and the second is keeping the hood open. It’s just about impossible to build accurate-looking hood hinges that are also strong enough to do the job they are supposed to do: they’re fairly complicated mechanisms with springs and multiple pivot points that just can’t be accurately reproduced in plastic. Well, J3 Models has a solution to this problem in their fixed open hood hinges.

Each hinge consists of a piece of photo-etched (I assume) metal representing the hinge itself, and a spring which attaches to the hinge to produce a fairly good replica of a hood hinge in the open position. There is a large horizontal surface available to attach the hood to, and another large surface that can be glued into the engine compartment to hold the hood in the open position.

Review Author
Mike Howard
Published on
April 14, 2009
Company
Eduard
Scale
1/24
MSRP
$22.95

Having recently gotten back into car modeling, more specifically Group "C" type cars, I jumped at the chance to review this pre-painted (blue) 5-point Sparco harness set. As with most high speed racing endeavors, the rules require some very stout driver to seat retention systems (seat belts), but these are poorly represented by either molded-in details or by decals. Eduard has come to the rescue with these excellent looking seat belt/harness sets.

I had to do a little research and stash cross-referencing to see what Group "C" car model that I had that would use the blue harnesses. After a short search, I found that the 1988 Le Mans winning Jaguar XJR-9LM (the Tamiya kit) used this color harness. The belts have a very nice texture to them and the colors are quite brilliant. As can also be seen in the photos, the lettering is very sharp and clearly printed.

Review Author
James Woody
Published on
April 14, 2009
Company
AMT
MSRP
$13.95

All right, a new Star Wars kit. AMT has finally released the Corporate Alliance Droid from the Revenge of the Sith©. This kit features 37 parts molded in light gray plastic and instructions. There are no decals or painting instructions provided with this kit, even though the instructions call out 11 different colors of paint.

The molding is fairly sharp with some ejector pin marks and mold separation lines. One part has the Lucasfilm copyright marking right were it will be seen, rather than on the inside of a part. The tracks are molded in one piece with separation lines down the middle and mold stubs all over the inside that will require some careful cutting to remove.

Overall this is a welcome kit from the Star Wars universe and with a little research on painting should make up into a very nice model.

© 2005 Lucasfilm Ltd. & TM. All rights reserved.

Review Author
James Woody
Published on
February 5, 2009
Company
Fine Molds
Scale
1/72
MSRP
$230.00

What can I say about this new model kit except WOW. The box is a whopping 17.75" x 27.75" x 4". Inside the box there is 16 part trees, a poly bag of screws and poly caps, decals, and a 24 page instruction booklet. The instruction booklet has 34 steps with options to build the Falcon from either Episode 4 or 5, because you get figures of Han, Chewie, Luke, Leia, C3P0, and Obi-Wan seated (for display in flight on the display stand) or of Leia, Luke, Han, and Sandtroopers standing with weapons. You get a paint and decal placement chart that is the size of the box, and a second sheet that has color photos of the filming prop.

Review Author
Pablo Bauleo
Published on
December 31, 2008
Company
The Small Shop
MSRP
$39.99

Photo-etch bending could sound intimidating but it shouldn't, particularly if you have the right tools for it. The Small Shop has designed "The Bug" to be the one-stop photo-etch bending tool. The tool is very well designed; compact, versatile, easy to use and made of aircraft grade aluminum.

The rotating head has a 2-inch straight edge for long bending lines, a "swiss comb" side with 6 "teeth" for boxes, and a variety of fixtures to fold parts of different sizes and material strengths, or for scratch built handles. All of these in a compact 2x2.5 inch base. It should be mentioned that some of hold-down fingers are reinforced for bending thicker brass, while others designed for thinner, more delicate parts. It is a nice touch from the Small Shop to include a razor blade (used for folding) with the tool.