To honor funny car racers of the ’60s and ’70s, Round 2 LLC announced last year that it will be releasing a new drag racing memorabilia line called "Legends of the Quarter Mile." The first model kit released was Arnie "The Farmer" Beswick's 1969 GTO funny car known as the "Super Judge." Hailing from Morrison, Illinois, Beswick is a legend in his own time. He is the most well-known Pontiac drag racer in the world. For over 50 years, his successes have made him a fan favorite. Keep in mind this nostalgia kit was originally issued in 1969 by MPC, and has been reissued several times since, this time in a very cool original box art. As it’s an older kit, expect to spend considerable time cleaning up the parts. Round 2 has also added "MH Racemaster" printed slicks and very nice Beswick decals. The assembly breaks down into several sub assemblies:
Welcome to the IPMS/USA Reviews site!
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.
To learn more about IPMS/USA, please see our About Us page.
Master Model is a company that makes turned brass aftermarket parts, specifically pitot tubes, refueling probes, and antennas.
The first thing I would like to point out is how good the packaging and instruction sheet is. The packaging consists of a zip-lock type bag, while the part is in a smaller bag, keeping it from moving all over. The instruction sheet is very clear and easy to understand, only needing 3 steps. Cut off original part, drill a hole (0.8 mm), glue in the new metal part – complete. Just be careful drilling the hole, especially in 1/72.
When compared to the kit part – there is no comparison. The kit pitot tube looks like a little blob of plastic, while the Master Model part is a complete work of art. Once you use a couple of these pieces you will be completely spoiled and never want to use the kit pitot tubes again.
I was intrigued in seeing a 54mm bust available for review. I had painted a few larger scale busts, and have also painted a number of 54mm figures, but never a bust in such a small scale. I asked to review it and subsequently received the Morland Studios 54mm offering of a – or would it be The – Vampyre Lord? I finally settled on The Vampyre Lord because I couldn’t find anything relating him to a gaming scenario or a story line, so I see him as a standalone character. Not personally knowing any vampyre lords, it’s always so hard to figure how they would like to be addressed!!!
This kit is basically a slightly upgraded re-box (reboot) of their Premium Edition Kit 6317 that came out in 2008. The new parts are two photo etched tool boxes instead of one, a newly designed photo etched tool box to fit on the rear of the fighting compartment, different Magic Tracks specifically for the Kursk campaign, and a new set of decals that are supposed to allow you to build any vehicle that served with the s.Pz.Jg.Abt.653 or s.Pz.Jg.Abt.653 units at Kursk.
This is a multimedia kit comprised of 270+ styrene parts, magic tracks in the early pattern, three photo etched frets, a turned aluminum gun tube, decals, and the set of instructions that need to be reviewed very carefully before gluing any parts together. Most Dragon models today are a collection of old sprues with new sprues added to create a new kit variant, and Dragon has done so with this kit.
I started war gaming when I was in high school because I was always interested in military history. I’ve also wondered about the “what if” scenarios of different battles. My interest in the subject just stayed with me through college and even into the Navy. I remember while I was at the anti-submarine warfare base in San Diego, California, my barracks room mates and I used to push our bunks out of the way and play General Quarters, metal warships and all. So when they wanted someone to review the War and Conquest rules book, I just had to jump at the chance to do it.