This follow-up review of Eduard’s detail set covers pretty much “everything else” in the set since the cockpit was covered in Part One. I won’t summarize that section here, but have provided the link to it if you’re interested in reading and referencing that one to get the complete picture of this detail set.

A drawback of this entire build had nothing to do with the Eduard set---the Airfix A-4B kit I purchased was damaged---it came out of the box with three of the six tiny little slat tracks broken off, and worse yet, missing from the poly bag to boot. This further complicated the project and caused me lots more heartburn and delay than if I’d had a complete kit.

This is another finely sculpted resin figure from The Bodi. The figure is sculpted to be leaning against a motorcycle and has a recess on his butt for the motorcycle seat. The figures body is molded in a full-length leather greatcoat that is pulled back and buttoned around the legs. There is also a recess across the back for the rifle slung across the shoulder. A gas mask canister is strapped under the right arm, but there is no other equipment. The figure does have goggles around the collar.

The body has a pronounced mold seam running up the side of the legs and up the sides of each arm. There is also a seam in the figures jacket running up the arm so make sure to remove the mold seam, not the jacket seam. There is flash between the two legs that will need to be removed. The figures hands are not gloved and have good detail. Straps and the figure’s belt are crisply detailed.

Each issue of Scale Aircraft Modeling has the same basic design and format. That's not a bad thing as it is jam packed with superb aircraft builds and tips. In this issue, there are four feature articles, an Aviation in Profile piece, and five Compact Build Reviews.

The Feature articles for this issue starts with Jay Laverty's build review of the KittyHawk Models 1/48th scale F-101A/C. natural metal finishes are tough but Mr. Laverty does justice to the kit! There are great tips about working with photoetch and preparing for the metal finish as well as using Alclad. This really hit home with me as I am almost done with the IPMS review kit of this aircraft.

Next up is Mr. Laverty's build of the hot new Airfix 1/24th Scale Typhoon. This is a large kit and will be built in multiple parts. In this issue, the cockpit and wing spars are assembled and look fantastic.