Brengun has produced a detail set of modern US Navy Wheel Chocks. With all the 1/32 scale kit out there, these would make a great display item. The set consists of 8 nicely cast resin pieces. Four of these are the blocks, two are the rails and the last two are two tiny locks for the rails. The tread patterns and lines on the blocks is very well defined. The rails include the toothed pattern used to lock the chocks in place just like the real item. The lock are very small so caution will be needed.

Preparation of the set requires removal from the casting blocks. The large pieces are a snap. Be careful removing the rails. The resin is strong. I used a photoetch razor saw and slowly worked it off with no issues but patience is needed. Same goes for the locks. Due to the casting process, you will need a little clean up on the channel where the rail passes through. I used a sharp knife and micro file and it cleaned right up.

After winning the 1988 WGP500 for Yamaha, Eddie Lawson jumped ship and went to ride for Honda. Despite extremely stiff competition at events all over the world, Eddie Lawson's finishes were consistently in the top two, with four first place finishes. With all his wins combined, Eddie won the 1989 Grand Prix Championships for the Rothmans-Kanemoto-Honda team, making him the only rider in history to win two consecutive championships with two different teams..

Hobby Boss released a 1/48 scale kit of the Blohm & Voss Bv 141 reconnaissance plane last year. Eduard has released this detail set for the kit.

The detail set comprises of 2 frets of metal parts, one with pre-painted instrument panels, consoles and seat belts, the other fret is unpainted brass. The unpainted sheet contains main landing gear doors, ammo racks, walkway area for the wing and other small details.