Based on the chassis of the ubiquitous GAZ Soviet “jeep”, the BA-64 served in various incarnations throughout most of World War II. Used primarily for scouting and liaison work, the two-man vehicle was robust and durable, if lacking somewhat in creature comforts. It soldiered on after the war, being supplied to various Warsaw Pact countries during the early stages of the Cold War.
Welcome to the IPMS/USA Reviews site!
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.
To learn more about IPMS/USA, please see our About Us page.
A Brief History
When first produced, the Vickers-Armstrong “6 ton” light tank could not find acceptance with the British Army because the 2 small turrets on the tank were fitted with machine guns only. The tank was later modified into the “B” version that had a 47mm gun and the turret was moved to the right side due to traffic in England being left-sided.
The Model
Upon opening the kit box, there are 12 sprue trees in a bag, some vinyl treads and a small decal sheet. The smaller parts trees are lettered with numbered parts. The largest tree is not lettered but the parts are numbered. There is no parts layout diagram. Marking options are for a Mk. F and B version in Bulgarian Army colors, 1938, in what looks like Panzer gray or a Mk. F version for a British Army training unit, 1939, in a dark earth color. There appears to be no decals for the British version but turret decals are provided for the Bulgarian version.
Loon models (Roll Models brand) has added an aircraft seat to their 1/72 aircraft accessory line. This one is for the Messerschmitt Bf-109 B-E. Loon models doesn’t specify a kit for this seat, but it will have to be a kit that has a cockpit in it and it can’t be one that has a huge seat in it, like some of the older kits have. While I was looking through my stash for a kit that would be good for this review I compared the Loon seat with and an old Revell kit, an old Hasegawa kit, and an Academy kit. I picked the Academy kit of the Bf-109E because the seat was comparable to the size of the replacement. The older Hasegawa kit was out because the seat was molded to the floor, it would work but I didn’t want to cut out the seat. The older Revell kit had an extra large seat that was reminiscent of an old BarcaLounger and had a piece of the back hull molded to it
Before World War II started, Germany had already begun to investigate the feasibility of putting infantry support guns under armor and giving them cross-country mobility, providing heavy fire support to infantry units during the advance. This led to the line of vehicles collectively known as Sturmgeschutz. Built on converted Panzer III chassis, they were produced in ever increasing numbers right up to the end of the war. Continuous up-grades were made as their roles evolved. Originally envisioned to provide on-call, organic fire support to infantry units during the assault, they became premier tank killers of the German armored forces by the end of hostilities.
This is the first of a 2 volume set detailing the history, tactical development, and use of the various marks of the Sturmgeschutz III, commonly referred to as the StuG III. Volume 1 is predominately text, whereas Volume 2 is mostly photographic in content. This book offers a wealth of data for the modeler as well as those more interested in the technical aspects of this weapons system.
Chapters cover background, technical development, and series production, design variants A thru G, the factories involved in production, and combat records and troop reports. There is a full developmental section, where the evolution of tactics is examined. Due to the requirements of the conflict, a weapon developed to support the infantry with mobile heavy firepower, evolved into a premier tank killer and improvised tank replacement.