Scale Aircraft Conversions has developed a set of metal landing gear for the relatively new Airfix 1/72 B-24s. Airfix first released the B-24 H in 2024 and followed by the B-24D in 2025. The kit parts are stout but these metal replacements provide the opportunity for final adjustments and alignment of the gear and wheels. Airfix have addressed the shortcomings of previous B-24 designs by improving the front gear and arranging for solid mounting with 3 contact points. The old Minicraft and Academy kits have only one contact point and the Hasegawa only two. I have included photos of the parts without primer but this is only for clarity and to make it easier to differentiate the SAC gear from the necessary plastic parts. The casting blocks will need to be carefully clipped off and mold part lines cleaned up. Also test fit and adjust for the wheels you intend to use since this can be very awkward after the gear parts are mounted to the kit.
What's New
This book is the third in the series of medal of honor recipients in the Army Air Force during World War II. The careers of nine aviators and details of the aircraft they used are profiled in this book:
Table of Contents
- Acknowledgements
- Introduction
- William Lawley
- Darrell Lindsey
- Archibald Mathies & Walter Treumper
- Jack Mathis
- Thomas McGuire
- Edward Michael
- John Morgan
- Harl Pease
- Index
Organization of chapters
Each chapter includes the flying record of the recipient, list of missions flown, the Medal of Honor citation, B&W photographs of missions, color profiles of aircraft, and the careers of the Medal of Honor aviators.
I asked to review this as I have never used any Yahu Models products before, and I have the Airfix Chevy M6 Bomb Service truck in their USAAD Bomber supply set. Unfortunately, I found out the set, while saying 1/72nd, is actually made for the 1/35th scale ICM series of kits. The back of the package has the correct 1:35 notation.
The set is very nicely detailed with 2 small frets of photoetch. The first one has a full-color instrument panel and separate bezels to add to it. The second fret has some pre-printed placards, including for the engine bay.
Overall, this set will add a lot of extra detail, even though I think the bezels are a bit too small for my skill level, but I also think you could get away without adding them.
Other than the scale confusion, if you have the ICM kits, these will look very good.
Thanks to Yahu Models and IPMS/USA for supplying the review sample.
Background Notes
This is a white-metal replacement for the Magic Factory A-4M Skyhawk kit and provides all the small details to match those of the kit’s parts, as well as those from the plastic kit itself.
While the Magic Factory’s A-4M kit is a great kit in itself, this aftermarket kit provides two aspects which will aid in completion of the base kit: (1) all of the small details are faithfully replicated in white metal (including expansion marks, collet rings, attachment points for both the rear and front wheels and gear retraction bar) and (2) the added weight provided by the white metal itself adds not only to the strength of the landing gear but more importantly the sheer weight itself of the metal gear parts.
Initial Impressions of the SAC A-4M Conversion
I was initially quite impressed with this kit. The surface detail, which contains a lot of surface rivets, appears to be accurate and true to scale for this a/c.
There were 13,738 P-40 Warhawks built during World War II, making it the most produced American fighter aircraft of the war. Among the multitude of 1/48 scale P-40s are the new Eduard kits of the P-40E/N. As aircraft modelers well know, aircraft models displayed on their landing gear are susceptible to damage from the weight of the model, especially on styrene landing gear.
Scale Aircraft Conversion has had the solution since 1990. Their white metal landing gear is designed to bear the weight of the model and complement the detailed non-load bearing plastic parts. Their extensive range covers white metal landing gear from 1/144 to 1/18 scale aircraft.
Another in ICM’s range of paint sets, which is intended for use with any kit of a WWII RAF training aircraft; the box illustrates a Hampden and Tiger Moth. The set contains the following six 12ml paint pots; I have listed their likely intended uses:
- 1003 Deep Yellow – Yellow (aka ‘Trainer Yellow’ – the RAF had only one Yellow during WWII)
- 1023 Aluminium – Aluminium Dope
- 1050 Saddle Brown – Dark Earth
- 1053 Leather Brown – alternative Dark Earth
- 1069 Extra Dark Green – Dark Green
- 1072 US Dark Green – alternative Dark Green
The back of the box has a drawing showing where to use each color on a Hampden and two Tiger Moths, one in overall Aluminum Dope, the other in early Temperate Day Scheme with Yellow undersides and ‘trainer bands.’
On December 17, 1935, the first of a ground-breaking aircraft that ushered in a new era of passenger flight: the immortal DC-3, which needs no introduction and is still a common sight 90 years on; the illustrious DC-3, about which so much has been written for 90 years; the glorious DC-3, which holds a special place in the hearts of aviation enthusiasts across the globe.
Every 10 years, someone releases a book titled “Douglas DC-3: [X] Glorious Years." First, it was Arthur Pearcy with his 40 Glorious Years, 50 Glorious Years and 60 Glorious Years. This year, it’s Fonthill Media’s turn with their new book Douglas DC-3: 90 Glorious Years. This is a reprint of their previous book Douglas DC-3: 80 Glorious Years, printed 10 years ago.
MMP was founded in 1996 by Roger Wallsgrove, to publish "Mushroom Model Magazine". This quarterly modeling magazine was developed from "Mushroom Monthly", a club newsletter which ran from 1985 to 1995, achieving a world-wide reputation for quality articles, fearless and honest reviews, and a great sense of humor. From 1997, the magazine was produced in collaboration with Robert Peczkowski and Artur Juszczak (Stratus), which meant a big leap in print quality and design. MMP expanded into book publication in 1999 with Stratus, and since then they have built up a list of hard cover and soft cover titles on aircraft and aviation, naval, military vehicles, and military history. Stratus/MMP Books are distributed in North America by Casemate Publications. One can find additional information available on their Facebook page: https://www.facebook.com/mushroomModelPublications/.
Upon opening the cover, there is a reinforced white inner box that does a good job of protecting the kit’s seven gray plastic sprues, and decal sheet (I recently heard on the Beyond the Box Art podcast that ICM’s boxes are designed to withstand the rigors of delivery services, and this box definitely meets that standard). The instructions span 12 pages and cover 38 steps. The downloadable instructions are also available separately online at the ICM website. Take care with small pieces (grab handles, etc) as the plastic is fragile and can break when removed from the sprue gates.
This is a former Revell M2/M3 Bradley kit (No. 03143) that was first issued in 2005 (with the hull tub dating to 2001 Kit No. 03124). The ICM boxing uses new decals and keeps it relevant for modern armor builders. The inclusion of decals for four colorful Bradleys, where only one is overall green, is nice and really highlights the M2 Bradley’s early career.
