EVEN more THANKS VERY MUCH to our friends at Eduard in Czechoslovakia!, and Phil and John in the specialized shipping to reviewers business.

This review is for the resin wheel and tire assembly (plus masks) designed for the early version of the Tempest V. Superb detail, Manufacturer info on the tire wall, inflation stem peeking out from one of the cooling vents, and detail on the brake cover plate on the back. Follow my instructions for success: (BTW, I cleaned off the wheels with Blech white to remove any mold release, and used Duplicolor® brand flat black primer in a large spray can; this ensured I had NO problem with paint adhesion over resin).

Once more a rousing THANK YOU VERY MUCH to our friends at Eduard in Czechoslovakia! How I ended up doing this review? A co-reviewer ran into some personal difficulties and I volunteered to finish his review for him. Thanks David for sending these items, and John for supporting my effort to help a fellow reviewer.

When I received the box from David, I knew what I was getting. The review will be in four separate tomes: first, this one, to cover the Overtree kit, the resin Brassin wheel set, a brassin etch detail fret, and the Overtree stencil decal set.

Eduard’s latest addition to the Brassin line of resin aftermarket pieces for 1/32 scale jet aircraft is a set of two AIM-120A/B AMRAAM medium range missile. Each box contains parts for two missiles with the option of making a training or tactical version. Inside the package, you’ll find 26 pieces of perfectly cast resin with options of two different heads and two different motor sections. There are also decals included for both versions.

So, first decision: tactical or trainings. Use the following parts for the one you choose:

EVEN more THANKS VERY MUCH to our friends at Eduard in Czechoslovakia!, and Phil and John in the specialized shipping to reviewer’s business.

This review is uber simple without a tip requirement for the driver. It’s the basic stencils from the Tempest Profipak kit decal sheet, to which you can apply to the marking you want from the kit OR some other source. It’s all there… and the only decals I didn’t use were those specific to certain kit markings; like the door outline in red with a lot of instructions on how to open it, the yellow “cut here on the canopy, and myriad two-dot decals to indicate airframe bolts with specialty metal composition.

I did not have time or vision to put the dots on. Sorry.

Eduard’s latest addition to the Brassin line of resin aftermarket pieces for 1/32 scale jet aircraft is a set of two AIM-120C AMRAAM medium-range missile. The C version of this missile started making operational use in 1996. That means this missile is appropriate for jets past 1996. It featured extended range and homing improvements over the A/B version. Each box contains parts for two missiles with the option of making a training or tactical version. Inside the package, you’ll find 26 pieces of perfectly cast resin with options of two different heads and two different motor sections. There are also decals included for both versions.

So, first decision- tactical or training. Use the following parts for the one you choose: