Reviews of products for scale aircraft models.

Review Author
Perry Downen
Published on
Company
Eduard
Scale
1/72
MSRP
$32.95

My thanks to Eduard for furnishing this photo-etch set for review and IPMS for allowing me to do it.

The Avro Lancaster of World War II fame can trace its linage back to the twin-engine Avro Manchester. The Manchester saw a lot of action in the early months of World War II. However, it was underpowered and generally did not meet RAF expectations. Using the Manchester as a starting point the Avro engineers increased the wing span, replaced the two Rolls-Royce X-24 Vultures with four Rolls-Royce V-12 Merlins, lengthened the fuselage and redesigned the tail. The results was a bomber with impressive performance and excellent flying characteristics. Its top speed was 282mph at 63,000 lbs. and its landing speed was 95-100mph using the old split flap design set to full down.

Review Author
John King
Published on
Company
Platz
Scale
1/144
MSRP
$18.25

Background

Platz, out of Japan, has been involved in the 1/144th modeling community for a while. They have produced many of their own kits and have teamed up with another Japanese company called F-Toys. F-Toys produce various subjects, among them being 1/144th scale aircraft kits. These kits from F-Toys are typically pre-painted, mostly assembled, and somewhat snap together. Many 1/144th scale modelers will take these pre-painted F-Toys kits strip them down, add details, repaint, and decal them. However, now we are seeing Platz take those same F-Toys kits and produce them as traditional model kits. This Mitsubishi MU-2 is a prime example of that venture; first, it was released under the F-Toys name as a pre-painted kit, and now it’s released as a traditional model kit.

Review Author
Keith Gervasi
Published on
Company
Eduard
Scale
1/48
MSRP
$34.95

History

As there is enough on the history of this aircraft either in print or on the internet I will not go into it here. Suffice to say that the Hellcat is the most successful carrier based aircraft in history as 12,275 were built, 270 were lost and Hellcat pilots claimed 5156 kills in less than two years of ops.

Review Author
Chris Smith
Published on
Company
Academy Models
Scale
1/48
MSRP
$55.00

Introduction

June 6, 1944 “D” Day was the day when the allied armies crossed the English Channel en mass and landed on the beaches of Normandy to begin the slow march across Western Europe This battle was the start of the allies invasion which ended in Berlin with Hitler’s surrender. 2014 marked the 70th anniversary of this monumental event. Each day, we lose more of those who participated or lived through this battle. Kits, like this one, help us (and especially the younger builders out there) remember what happened on that day and why it was so important to the course of WWII. The P-51 has been covered by many other sources, as has the “Bluenose” 352nd Fighter Group based in Bodney Norfolk, UK.

Review Author
Chad Richmond
Published on
Company
Eduard
Scale
1/48
MSRP
$34.95

Eduard’s Brassin line has some of the finest resin cast parts that I have ever run across, from any manufacturer. These exhaust nozzles are a direct one-for-one replacement for the kit nozzles. Those that come in the kit are the best I’ve ever taken out of a kit box, but Eduard’s are still another step above.

Eduard gives you two burner cans, two exhausts, two exhaust cones and a photo etch sheet with the flame holders. Each of the resin components has a very ease to remove pour block which takes no time in removing. You have to be careful with the exhaust cones however, because they have some very, very fine vanes that are pretty much guaranteed to break during removal of the pour block. You won’t be able to see them once the cans are inside the model, but you will know they are missing! Install the cans at the same time in the construction process as the it parts, and you’ll be on your way.

My thanks to Eduard and to IPMS/USA for the review samples.

Review Author
Phil Peterson
Published on
Company
Aires Hobby Models
Scale
1/72
MSRP
$13.49

The P-40B kit from Airfix has been pretty popular because of good detail, accurate interior and a great price. But for those of you who want to add that bit of extra something, this set is for you.

You get eight pieces of nicely cast resin just as we have come to expect from Aires. The pieces fit inside the fuselage behind the cockpit area and are not replacement parts for any kit parts.

Construction looks fairly simple once you cut off the casting blocks. Removing the radio door molded on the left fuselage shouldn’t be too hard, drill a hole and then use files to clean up the corners. The only other modification to the kit is to remove one of the kit alignment tabs on the right fuselage.

Then it is simply a matter of adding the interior piece and the radio parts. Attach the supplied door in the open position after painting and you are done. Test fitting looks like you may not even have to shave down any of the inside fuselage for the interior piece.

Review Author
Phil Peterson
Published on
Company
Aires Hobby Models
Scale
1/72
MSRP
$6.99

The new Airfix A-4B is a great little kit for a great price but can always use a little extra detail. The Aires set supplies new stabilizers with separate control surfaces which are a direct replacement for the kit parts.

You get four pieces of perfectly cast resin. Because this is a simple replacement, no instructions are included. Just remove the parts from the casting blocks and install. The parts display great detail and they look a little better than the kit parts.

Not much else to say about this one but I did do an online search and it looks like most Skyhawks had the controls inline with the stabilizer. I did find a few with a slight angle to them so this kit will make that option much easier than modifying the kit parts.

Thanks to Aires and IPMS/USA for the review kit.

Review Author
Phil Peterson
Published on
Company
Aires Hobby Models
Scale
1/72
MSRP
$6.99

The Tamiya kit of this famous tank buster is top of the line but why not add a bit more detail. The Aires set supplies new stabilizers with separate control surfaces which are a direct replacement for the kit parts.

You get four pieces of perfectly cast resin. No instructions are included as these are direct replacements for the kit parts. Just remove the parts from the casting blocks and install. The parts display great detail and they look better than the kit parts.

Online photos show Shturmoviks with their control surfaces down so this will make that simple modification that much easier.

Thanks to Aires and IPMS/USA for the review kit.

Review Author
Roger Rasor
Published on
Company
Albatros Productions, Ltd.
MSRP
$15.00

Windsock WWC Winter 2014 is the last issue of Volume 30. Like the previous issues in Volume 30, it provides readers with a variety of expert information on WWI aviation history, aircraft modeling, articles by top-notch aircraft model builders, valuable technical reference material and information on new hobby products related to the Great War.

Review Author
Chad Richmond
Published on
Company
Pavla Models
Scale
1/72
MSRP
$16.95

Meng’s 1/72nd scale F-102’s are very nice kits with a nicely detailed cockpit interior. Of course, we all know that there is always room for improvement. The Czech company, Pavla, came out with a very nice replacement for the kit cockpit. You get eleven nicely cast parts in grey resin. Included are a new cockpit tub with detailed side panels, instrument panel, seat with seatbelts and shoulder harness and ejection seat guide rail, canopy elevating mechanism, new HUD, separate rudder pedals, new yoke and side console levers.

The instrument panel is crisply cast, but the kit gives you a nice instrument panel decal that will allow you to produce a very convincing instrument panel in this small scale. There is more detail in the Pavla instrument panel, however, so some careful painting and drybrushing can produce an exceptional instrument panel.