Model Car World is a model company that specializes in resin car bodies and paint finishes matched to automotive colors. MCW was purchased by Wings Wheels and Waves in 2015 and they have expanded their paint line to include military colors.

The primer comes in 1oz. bottles that have a bb inside to facilitate mixing. The primer is pre-thinned for airbrush and is recommended by MCW for their finish paints

The primer is very thin and should be thoroughly shaken before spraying. MCW provides a thinner to be used with their paints, but the primer was pre-thinned and did not require additional thinning. The paint should be applied in thin wet coats, and the lacquer dries very fast. The airbrush should be 2 – 3 in. from the surface to obtain a wet coat.

After ten years of Countach production, the 1985 four valve per cylinder “Quattrovalvole“ V-12 coupled with a new fuel injection system was a significant upgrade. If that wasn’t enough for auto enthusiast they only made 610 of them which sold out immediately.

This review covers the skill level 5 (ages 14 years and older) 2016 release of the Lamborghini Countach 5000 Quattrovalvole 1:24 Scale Italeri Model Kit #3683. This kit is molded in white, grey, black, chrome, and clear with vinyl tires. Decals are made for the detailed interior and the chassis is made in multiple parts for enhanced finishing. The motor is highly detailed and can be viewed through the open engine cover. The body is also a multi-part unit crisply molded and proportionally correct. Finished dimensions are Length 7-¼”, Width 3”, Height 2”.

This is a photoetch interior set for the Revell Ventura Mk. II. This set includes two photoetch sheets. One is colored and adds a lot of needed detail to the cockpit. The photoetch really make the cockpit stand out.

In the packet is:

• 1 colored photoetch sheet
• 1 photoetch sheet
• 1 instruction sheet

Summary

This is a fantastic set for a kit that needs it. The cockpit parts really add some detail. I did find some of the small parts were very tricky to add. Also, I would recommend installing the assembled parts 34 and 14 into part 7 before you fully form it. The set also adds details such as magazine boxes, navigators table, turret gun control panels, grab handles, and additional seat details.

Thanks go to Eduard for providing this set to review and IPMS USA for allowing me to review it for them.