When Eduard released its 1/72 MiG-21MF kit last summer it also released several resin and photo-etch sets to go with it. One of the sets is a package of resin wheels. The set provides two sets of main wheels (one with solid wheel covers, the other with spoked wheel covers) and two nose wheels. The instructions note that the solid wheel covers were seldom used on the MF version of the MiG-21, so check your references to see which type the aircraft you are modeling has. I used the spoked set and I have put the other set aside on the assumption that the MiG-21MF is just the first of a MiG-21 series by Eduard, therefore it will come in handy later on.

This is another resin set that Eduard released to upgrade its new MiG-21MF kit. The set provides the five base pylons for the MiG-21, two for each wing and one for the centerline station. The pylons are drop-in replacements for the kit parts and require the same holes to be drilled out as the kit pylons do, so no additional work is required to use them.

In reviewing the kit’s instruction sheet, it states that for the outer pylons, there is a difference between the ones used when weapons are mounted and the one used when fuel tanks are mounted on the outer wing stations. The set does not say whether the set’s outer pylons (parts R4 and R5) are weapons or fuel tank pylons, so I checked the instructions for Eduard’s R-3S missiles and pylons set (#672 18). This set also lists parts R4 and R5 as being used for the outside pylons to which the missile rails are attached, therefore I assume that the ones included in set 672 184 are also weapons pylons, not fuel tank pylons.