Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Rod Lees
Published on
Company
Aviaeology
Scale
1/48
MSRP
$9.99

Aviaeology is a company based in Ontario, Canada and calls itself “A product of research, illustration, & design for students, enthusiasts, & practitioners of Aviation History Publications, Decal Sets, and Model Parts

Right now I’m trying to make my fingers work in my back room where my laptop and I are banished for doing all our nefarious Modeling reviews and such works. However, Ontario is a LOT colder than Oklahoma, so I have it good…

Therefore, IPMS/USA sends warm regards once again to the stalwart proprietors of Aviaeology, Alison and Terry Higgins, for supporting the IPMS USA reviewer corps with yet one more of their marvelously produced, meticulously researched and top-shelf historical and artworks. And thanks to IPMS leadership for sending it to me to be reviewed.

Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$5.15

The release of the Wolfpack and Trumpeter T-38 Talon/ and F-5B/ RF-5A/E/S Freedom Fighter kits brought this light weight multi-role fighter into the modern age. I hate having to remove the mold lines. I can never keep the roundness of cross section. Then there is the strength of the brass itself. No plastic can withstand the same amount of pressure as the brass can.

Packaged in a resealable plastic bag, with card stock backing, are three beautifully turned metal pieces. One pitot tube and two gun barrels. Depending on what aircraft variant you want to do depends on what you will use. The T-38 only needs the pitot tube. Any variant of the F-5 would need the pitot tube and the gun barrels. Again, it depends if one or two guns are used.

The instructions are printed on a small one-sided sheet of paper that explains the correct size drill bits to use and how deep to make the holes. This is very informative and useful.

Review Author
Dick Montgomery
Published on
Company
Scale Aircraft Conversions
Scale
1/32
MSRP
$17.95

Scale Aircraft Conversions offers a set of white metal aftermarket parts for the Copper State Models Nieuport XVII. You can find information about the Copper State kit at https://copperstatemodels.com. As with other SAC offerings this set of landing gear struts and V-wing struts are white metal and are true to the detail found on the CSM parts that are to be replaced.

Review Author
Dick Montgomery
Published on
Company
Scale Aircraft Conversions
Scale
1/32
MSRP
$17.95

Scale Aircraft Conversions (SAC) offers an extensive range of replacement landing gear parts for a wide variety of kits. I have some experience using SAC items to replace kit parts and I’ve found that the SAC items add strength to the model without sacrificing any of the detail found on the original parts.

As mentioned in other reviews, I tend to be a rather heavy-handed modeler and I have a long history of “critical parts” failure with WWI models which is self-made and not a reflection on the quality of the original kit. I’ve snapped wing struts in half, broken off tail skids, and caused catastrophic damage to undercarriage support structures.

Review Author
Dick Montgomery
Published on
Company
OKB Grigorov
Scale
1/48
MSRP
$18.50

OKB is based in the EU and has been in the business of offering products of high quality since 2003. The website provides some excellent images of the products being offered and also an email address, which is “ info@okbgrigorov.com “. OKB offers kits featuring 1/72 scale armor, a wide variety of submarines, and 1/72nd weaponry that can be displayed with a 1/72nd scale figure. Note that when selecting the “Figures” option on the menu, one will be directed to those weapon sets and not to actual “figures”.

The Panther (Sd. Kfz.171) is one of the more well-known armored fighting vehicles used by the Germans in WWII. The Panther saw service on both the eastern and western fronts in Europe. OKB offers a number of after-market items to replace kit parts for the Panther, in this case, a set of 1/48th scale tracks for the Panther V (Late).