Scale Aircraft Conversions produces metal replacement parts for hundreds of kits in a wide variety of scales. Some of the landing gear sets are generic while others are designed to fit a specific kit. I’ve had some luck with cross-purposing some of the SAC gear, and having a Revell UH-34 in my stash I decided to compare this gear set, engineered for the Gallery kit, with the parts contained in my Revell kit.

The Parts

The SAC product is designed for an H-34, and my Revell kit is a UH-34. Googling images, I came to the conclusion that while there are some differences between the strut braces between the “H” and “UH”, I found enough similarity in appearance to assuage my concerns about significant differences in the appearance of the struts and bracing.

This accessory is for the Airfix, Hasegawa, and Heller Draken kits. The parts are replacement pitot tubes and an Angle of Attack sensor.

The Kit

You get three finely done brass parts in a plastic envelope, which is inside another plastic envelope. I found that the pitot tubes were in a separate tube-like pouch, with the AOA probe in a separated part of the inner plastic bag. I had to cut the bag twice to get the parts out.

I liked the instruction sheet, it was simple, and showed you exactly where to put the pitots and the AOA.

Assembly

This particular model had the tail pitot intact, but the nose one had been broken off long ago. I cut off the tail pitot and drilled a small shallow hole. The nose pitot required a little cutting to get the taper of the pitot to match the nose part.

This accessory is designed to be used with the Airfix, Hasegawa, Heller or Matchbox kits. The parts are a replacement for the pitot tube, angle of attack probe (AOA) and secondary pitot, located on the vertical stabilizer. I used a Heller Viggen which was previously used for a paint mask review. The sensor and pitots are silver on this aircraft. I found a great shot of a Viggen on airliners.net which showed this color nicely.

The Kit

You get three finely done brass parts in a plastic envelope, which is inside another plastic envelope. This is done to prevent losing these tiny parts during shipping, handling or storage.

Assembly

I painted the brass parts with Testors Aluminum Metalizer.