This is Model Art Magazine’s special quarterly issue that focuses on naval subjects. As with the regular Model Art Magazine this is printed in Japanese with some English subtitles.

The feature article in the Winter 2013 Special Ship Model Edition covers the Battle of Savo Island. The issue starts off though with some new releases that will be hitting model benches soon.

The Battle of Savo Island was the first major naval battle of the Guadalcanal campaign. Model Art devotes ninety-two pages to this battle with period photos, charts, line drawings, one fold out full color drawing of the IJN Heavy cruiser Chokai in action at Savo Island and of course models. The models are the biggest part of the article. They range from full build articles to photos of completed models.

Plusmodel continues its laser etched wood releases with a straight sided gate. This set is made from laser cut wood and contains two sheets of cut wood parts with 26 parts. The set also comes with directions to construct the gates.

Construction starts by removing the parts from the backing. There are small attachment points which are sanded flat. I used clear Elmer's glue for all the building. One note here. If you are going to stain the parts or paint them later, watch where the glue goes as it will fill the wood and leave some issues with the paint or stain working. To start, the door panels are two parts- back and front. This allows for depth which is great. I added glue and aligned the pieces and added weight to keep flat while drying. Once done, the framework on both sides is added and I glued and clamped these also. Plusmodel provides a nice diagonal frame on one side which is great. Once dry, the parts were given a light sanding with a fine grit paper/stick.

This kit from Plusmodel are two sorted waste containers for recycling...modern garbage cans! This would fit great into a modern diorama. The kit comes with 10 resin pieces, a small photoetch fret with four pieces and a small decal sheet. It makes two containers.

Construction is simple. Remove the pour spout from the container and the base. and glue together. There are three parts glued to the top and then the photoetch covers. These are excellent with one part being the flaps to push in the recycling and then a ring securing it. It did take some putty on the side of the main container at the mold lines but one application and a quick sand and done.