For those of you who have acquired the Revell Halifax in 1/72, you may have noticed that it gives you lots of options, including three different types of exhausts. While they’re not at all bad as they come in the kit, you’ll need to hollow out the ends of the exhaust stacks and that can be very tedious when you’re doing stacks for four engines. Quickboost, as they usually do, have stepped in and done that for you.

This set is for the Type B exhaust and provide exhausts for all four engines. They are nicely cast, in one piece, with no bubbles and the ends already hollowed out for you. Additionally, the kit parts are in two pieces each and you’d have to remove that glue seam. As usual, they’re a drop fit replacement for the kit parts and at the price, seem well worth it. After all, what is your time worth? Recommended.

Thanks go to Quickboost for providing the sample and to IPMS/USA for the opportunity to review it.

This was really a fun kit. There’s not many parts but you do get 4 surfboards, 3 figures, 2 garbage cans (fuel tanks), and SCUBA tanks.

Engine

Bottom half of the engine is molded to the chassis.

Chassis

Front ans rear ladder bars hold the suspension. There’s really not much to it.

Interior

Seats, shifter, steering wheel and column, resemblance of a dashboard is all you get.

Body

It’s a real simple body without much detail. I decided my version would resemble a pickup truck turned into a landscaping vehicle. After priming the body with Duplicolor grey sandable primer, I shot a few coats of Dupli-Color dark cherry followed by a coat of Nason 2 part urethane clear. Only a little bit of wet sanding and polishing with Novus #2 was necessary before applying a coat of The Treatment Model Car Wax.

For those of you who have acquired the Revell Halifax in 1/72, you may have noticed that it gives you lots of options, including three different types of exhausts. While they’re not at all bad as they come in the kit, you’ll need to hollow out the ends of the exhaust stacks and that can be very tedious when you’re doing stacks for four engines. Quickboost, as they usually do, have stepped in and done that for you.

This set is for the Type C exhaust, one of the stranger looking types available, and provided exhausts for one engine. Quickboost has made theirs a bit different than the kit parts and I think theirs are a bit more accurate. As usual, they’re a drop fit replacement for the kit parts and at the price, seem well worth it. After all, what is your time worth? Recommended.

Thanks go to Quickboost for providing the sample and to IPMS/USA for the opportunity to review it.