Recently I was given the opportunity by IPMS USA to review Aires Messerschmitt Bf 109G Gun Barrels for the 1/48 Eduard 109G series of kits. One of the first things to notice with this product is the excellent presentation of the packaging with the sealed flap on the back of package to allow for easy access to parts.

The molding on the resin gun barrels is excellent and they come off of the resin block with little effort. You receive 2 sets in the packaging, one set is of the MG 151/20MM canon that was used on the Bf109G. The G series 109 was designed to accept a variety of field conversion sets that allowed the changes to be made in the field. These were numbered from R-1 to R-7 with the MG 151/20MM canon under each wing being labeled R-6. These barrels make a good addition to the Eduard 109G series although there is not much difference in the look of both the resin and the one provided in the kit.

Recently I was given the opportunity by IPMS USA to review Aires Messerschmitt Bf 109G Flaps for the 1/48 Eduard 109G series of kits. One of the first things to notice with this product is the excellent presentation and packaging of the product.

The contents of the package contains 1 right and 1 left flap for the Eduard Bf109G series of kits. The flaps are easy to remove from the resin base by simply scoring the flap with your hobby knife and sanding the area smooth with some fine sandpaper or a nail file.

There are some small differences between the resin flaps and the flaps that come in the Eduard Bf 109G kit. The rivet detail on the Aires flap is a lot less pronounced and finer in detail than the kit part, and the fit is tighter to the wing right out of the package while the flaps that come in the kit need a little bit of sanding to get a similar fit and feel that you would want for the final representation of your model.

Zoukei-Mura first showed this kit at the 2015 IPMS Nationals and again this year in Columbia. Well, the kit has finally arrived and its beautiful. Many might have been a little skeptical with the other kits but it’s a Phantom and one of the most iconic planes made so a new kit is always welcome. In this part, we’ll look at what’s in the box and then get some parts built and painted starting with the cockpit.