Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Book Author(s)
Adrian M. Balch
Review Author
Allan Murrell
Published on
Company
Guideline Publications
MSRP
$20.00

This is a thin book with only 48 pages, but they are very high quality pictures. The book is an addition to the Warpaint series of books, this time about the Chipmunk, which is one of the most well-known post-war piston engine basic training aircraft. It was designed to replace the Tiger moth by de Havilland Canada and first flew mid-May 1946, the same year it entered service. The Chipmunk was used mainly by the RCAF and RAF.

The detailed color profiles are great for any modelers reference and the photos cover all types of the aircraft. I found this book fascinating and will be building a couple of the featured aircraft and this will be a fantastic reference for me to use. I recommend this book to everyone who likes and or builds Phantom’s

Thanks go to Guideline Publications for providing this book to review and IPMS USA for allowing me to review it.

Review Author
Keith Gervasi
Published on
Company
Brengun
Scale
1/72
MSRP
$20.00

What’s in the Box

Upon opening the box you should find a bag containing 2 sprues of grey, one sprue of tan and a sprue of clear plastic. Also included are a resin piece, decals and a two-page instruction fold out. The plastic looks cleanly molded but has some thick mold seam lines. The clear parts are clean & clear, and the resin intake is molded nicely. The decals are printed cleanly and in register.

Construction

For a kit with few parts this has a good bit of detail, especially in the pit. I will go through the basic construction of the kit itself even though I add the Brengun photo etch set for this review. The cockpit is made up of 10 parts with some nice detail molded in the sidewalls. Test fitting is a must for this kit as there are heavy mold seam lines that need to be cleaned up or you will NOT have fun! Before closing up the fuselage you will have to add the tail wheel support and radiator & radiator outlet flap.

Review Author
Keith Gervasi
Published on
Company
Brengun
Scale
1/72
MSRP
$15.00

Brengun has produced an accessory set for their P-51 1a kit.

What’s in the Package

This set contains a photo etch fret, clear acetate sheet with the instrument panel dials, 5 resin gun barrels and a single page instruction sheet. Upon inspection I noticed that a couple areas of the etched parts were not fully etched and that bending these would be not quite as easy as normal. The acetate sheet with the dials looked very nice but the gun barrels had a small problem…..two were warped.

Construction

It’s fair to say that most of this set deals with the cockpit, which is interesting in one respect, the kit has a one-piece closed canopy! Some minor “reducing” of some raised detail is required for the side walls but nothing real difficult. The control panel is pretty nice when completed but since you can’t see the rudder pedals, I decided to leave them out.

Book Author(s)
David Doyle Illustrations: Matheu Spraggins
Review Author
Frank Landrus
Published on
Company
Squadron Signal Publications
MSRP
$19.95

David Doyle’s latest book continues to expand on Squadron Signal’s long standing In Action series that initiated back in 1971. This is a completely updated and expanded edition over Squadron’s earlier Aircraft In Action number 35, a 50-pager on the F-111 by Lou Drendel that was published in 1984. This 2019 release is a totally new book that can be considered complementary to the earlier In Action. This latest edition focuses on color photographs (although black and white pics are used where appropriate) in addition to the additional 30 gloss pages.

Review Author
Will Kuhrt
Published on
Company
ICM
Scale
1/35
MSRP
$66.99

ICM Holding, a Ukrainian-based company known for outstanding quality, has produced a very nice version of a truck that you don’t see very often on the market. The W.O.T. 8 (Work Office Transport) was a World War II truck produced by the Ford Motor Company in Dagenham, UK. Ford (UK) was one of the largest suppliers of trucks to British Forces. The W.O.T. 8, a 4x4, 1.5-ton vehicle, was produced from 1941-1942. It was used in North Africa, Italy and also in Europe between 1942 and 1945. Around 2,500 W.O.T.8 trucks were produced.