Osprey Publications is well known for their books on military history and vehicles. This book is a follow up to the earlier Osprey release "General Dynamics F-111 Aardvark", which has also been reviewed.
Both German and Soviet military theorists in the years leading up to WW2 incorporated tanks into their battle plans to exploit breakthroughs in the enemy’s lines. These tanks incorporated turrets capable of rotating 360 degrees, thus making them expensive and time consuming to produce and maintain. Little thought on either side was put into providing the slower moving foot soldiers with self propelled artillery or anti tank capabilities. The Germans were the first to see the utility of providing their troops with SPGs, with the introduction of the Sturmgeschutz (StuG) and Sturmartillerie, self propelled tracked vehicles with limited traverse guns protruding out the front end of the vehicle, and capable of knocking out enemy hard points and limited anti tank duties. Such vehicles were cheaper to manufacture than tanks.
If you are looking to add some “life” to your next 1/200 scale US Navy ship, allow me to direct your attention to Eduard release 53109. This set contains 1/200 scale figures that are pre-painted, and require simple bending in order to create more of a three-dimensional effect. Although labeled as WWII, the U.S. Navy, being all about tradition, kept the denim work uniform in use past my discharge in 1991. The only challenge would be with the dress white uniform as the one depicted in the kit was discontinued sometime after the 1940’s. The figures are easy enough for anyone who is experienced with photo etched parts to use, and will make a nice addition to your next Ship, Submarine, or Boat of this scale.
For those readers not familiar with this series of publications, they are published by Ampersand Publishing, the firm responsible for the excellent Military Models in Review (MMiR) armor modeling magazine edited by Pat Stansell, one of my favorite magazines. As the title suggests, each issue of Allied-Axis contains a number of photo journal articles covering various aspects of the Second World War. The issue under review today contains three separate articles. For the most part, each page of any given issue is devoted to a single photograph, with an appropriate written caption. Thus the detail contained in each photograph is extremely good, due to its size. For the most part, the clarity of each photograph varies from good to superb, depending on the quality of the original print used. The Journal paper quality utilized is also very good.
The 1/35 scale CMP F15A Van Lorry by Mirror Models is a challenging build due to lack of clarity in part locations, but experienced modelers can build it into a nicely detailed model.
The kit comes nicely packed in a cardboard box, and each of the gray plastic sprues are individually bagged. On first glance there are many very small parts, and the detail of the molding is good. The parts have very large gateways, or sprue connections, for attaching the part to the sprue. The instructions noted that some of the gates are larger to avoid ejector pin marks, and suggests using a razor saw or scalpel instead of a sprue cutter to remove the parts. The sprue connections are wide but thin, and I didn’t break any of the parts removing when removing them from the sprue.
Set 3 of the Eduard Photo etch set for the Revell U-505 submarine in 1/72 scale consists of detail for the hull. I’m not a “PE guy” but as with Part 2 of the Eduard sets, when asked, I accepted the challenge since I had the opportunity to build the sub.
This set consists of one sheet of brass. Although the instructions do not show any removal of kit parts needed to install this set, I found that they adhere much better is you carefully remove the detail of the kit before gluing on the PE. It mostly consists of removing rivet detail.
I cut the parts from the fret with a sharp #11 blade and sanded them smooth with a sanding stick. The instructions are clear and the parts fit perfectly. This would be a great “first try” at using photo etch if you haven’t done so before.
My thanks to IPMS/USA and to Eduard for the opportunity to review this subject.
This is the Scale Aircraft Conversion (SAC) replacement landing gear set for the new tool Airfix EE Lightning kits and I must say that it is a very nice set. I took pictures of the kit parts and SAC parts side by side and as you can see they are pretty well detailed. You do have a little cleaning up to do because of mold seams but this is true with the kit parts also. Having built one of these already, it will be nice to have the metal nose gear for a little extra strength (due to the weight in the nose) on my next one.
The detail on the parts is pretty good and should look very nice after painting. One thing to watch out for is that one of my pieces was a bent a little and had to be straightened out but really was not difficult to do. I highly recommend this set for anyone that is building those kits.
Thanks go to Scale Aircraft Conversions for supplying this for review, IPMS for letting me do the review and all of you for reading it.
Let me first start off by saying this is not my normal scale for figures. I have been building 1/72nd and wargame scale figures for a short time and even some larger Super Hero kits but these are the first guys in 1/35th scale I have completed since a poorly painted 25 lber crew I did some 30 years ago, so please be gentle on any comments about the paint jobs. Thank-you.
OK, what comes in the box? Well, when I read WWII US Truck Crew I am thinking some guys for a Duece and a half but the artwork on the cover shows them sitting in a Jeep (oops, can I say that) and that would be the ideal vehicle for this set.
The first thing that struck me was the really relaxed poses. These guys look like they could be in a vehicle at rest or moving sedately down a nice dirt road, behind the lines.
With the release of the new Revell-Germany Bf-109G-6 and G-10 there is some nice little updates that are available. The latest release from Master addresses some areas that are absolutely necessary for a kit, the guns and the pitot tube.
The set includes three perfectly machined brass parts, two MG-131 cowl guns and one pitot tube. What can you say about these items? There is no cleanup. Simply replace the kit guns with these beautiful hollow guns. For the pitot tube you will need to drill a hole but nothing is too drastic. The instructions are easy to follow and explain the correct angle for the pitot tube on the Bf-109.
Beautiful rendition in perfectly formed brass, which will provide strength and won’t require cleanup of mold lines makes this an essential aftermarket addition.
Highly recommended
How many times have you sanded away the detail on a model and then had to rescribe it by hand? Well over the past several months Eduard has released several photo etch templates of different shapes to make your scribing a little easier. This set is one of those and it is used for access panels.
The set comes on one photo etch fret, but then can be cut down into three separate templates that will then conform to the rounded surfaces of your model kit. To get the examples of what the different panels look like, I chucked a needle in my pin vise and just started working around the template lightly at first and increasing pressure to get depth in the scribing. Once this was accomplished I sand the raised edges and then applied a wash to show off the new panel.
