Tamiya has yet again enhanced their venerable line of PzKpfw IV German main battle tank kits, tossing a few new bits into an already brand new Ausf. F(1) release, resulting in the long-barreled Ausf. F(2)/G model. The offering also includes five of the most detailed Tamiya figures to date, as well as a variety of personal equipment and bags to lay around on the upper deck. One thing is for sure – these last two kits are two of the finest armor models ever produced by Tamiya, and that says a lot.

The Messerschmitt Bf 108 Taifun (English: “Typhoon") was a German single-engine sport and touring aircraft, developed by Bayerische Flugzeugwerke in the 1930s. The Bf 108 was of all-metal construction.

Originally designated the M 37, the aircraft was designed as a four-seat sports/recreation aircraft for competition in the 4th Challenge International de Tourisme (1934). The M 37 prototype flew first in spring 1934, powered by a 250 PS (247 hp, 184 kW) Hirth HM 8U 8.0-liter displacement, air-cooled inverted-V8 engine, which drove a three-blade propeller.

Although it was outperformed by several other aircraft in the competition, the M 37's overall performance marked it as a popular choice for record flights. Particular among these traits was its low fuel consumption rate, good handling, and superb takeoff and landing characteristics.

This is a re-release of the F-104 A/C kit originally released by Italeri back in 2014. The kit includes six sprues of grey plastic, one clear sprue, a photo-etch sheet and two large decal sheets. In examining the sprues, it is clear that some of them are common to Italeri’s 1/32 F-104G as the sprues include the later zero-zero ejection seat, AIM-9L Sidewinders, several pylons that are not used on the F-104A or C, as well as two styles of ventral fins and exhaust nozzles. The decals depict five F-104As and one F-104C, however two of the six aircraft (markings E and F) are repeats from the original 2014 issue. Unlike the previous release, all 6 of the aircraft depicted in this kit are in a natural metal finish with white upper wings.

To start part 2, I started with the unique horizontal stabilizers. These are molded in a single piece (check out part one for a picture. This slots into the bottom of the fuselage with a rubber grommet and the two moving parts are actually separate allowing the entire thing to be posed. The fit is so good; I assembled the parts and left them off until later to ease painting.

I assembled the tail next and it consists of four parts. Since I was doing the VF-111 plane and its tail was white, I was worried about masking it off; no need to , the fit is so good, it also can be added later making painting easier. I did add the outer wing panels at this time and did have to do a little bit of filling with Perfect Plastic Putty.

History

If you were born in the last century at any time, you probably remember an older relative- perhaps a grandparent or older aunt who had an outhouse in the backyard. At the very least-- maybe a campsite or campground anyways. I frequented the one in my grandfather´s backyard as it was much easier than having to take off my shoes to go in the house and back then, I never wanted to come in. ICM has provided a relatively straightforward kit of the standard field toilet, although to be sure- one would probably only see these in more permanent set-ups. Most of the time these were set up over a hold in the ground with no wooden floor- but this is a dolled up version to be sure.

The Kit

Inside the durable cardboard box is just one sprue that contains the roof, door, sides, rear, and front frame of the assembly. There are also a few parts for the seat and inside assembly as well as a latch to lock yourself in and a handle for the front.