Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Paul R. Brown
Published on
Company
Eduard
Scale
1/72
MSRP
$9.95

The MiG-21 (NATO code name “Fishbed”) has the distinction of being the most-produced supersonic jet aircraft in history. It has served in the Air Forces of more than 60 countries around the world and continues to fly for a number of countries even today. Early versions of the MiG-21 were equipped with the SK-1 ejection seat while later versions were equipped with the KM-1 ejection seat.

One of Eduard’s newest lines of photo-etch is a series of seat belts and harnesses for a number of aircraft made out of photo-etched steel instead of brass. This set provides complete harnesses and ejection handles for two ejection seats. Based on the instructions for this set, it appears it is designed for the later KM-1 seat, so it would be appropriate for later versions of the MiG-21.

Review Author
Dave Morrissette
Published on
Company
Aviaeology
Scale
1/48
MSRP
$3.59

Aviaeology is very well known for their extensively researched decals covering a gamut of Canadian WWII subjects. This set continues that fine tradition by covering 1/48th scale Beaufighter Type TF.X’s from RAF Dallachy. RAF Dallachy is a closed air base located north of Edinburgh, Scotland on the North Sea. It was home to the RAF in WWII where it was used to harass and sink enemy shipping. The three squadrons covered in this set are Canadian (No. 144), Australian (No. 455) and New Zealand (No. 489) all flying the Beaufighter. The decal sheet covers 16 aircraft from these squadrons with markings for all planes but only National markings for one complete plane.

Review Author
Jim Pearsall
Published on
Company
Brengun
Scale
1/144
MSRP
$10.65

The Aircraft

The Me-163 was the first (and only) rocket powered fighter used in combat. It was also the first aircraft to ever fly at 700 mph, in 1944. As an interceptor, the 163 was less than outstanding, with only about a dozen Allied aircraft shot down, for a loss of 9 Komets.

The rocket engine used “C-Stoff”, hydrazine hydrate and methanol and “T-Stoff”, hydrogen peroxide. These were interesting to me because they are “hypergolic”. This means that they need no ignition source. Just mix the two chemicals in the combustion chamber and they burn. This proved very interesting when there was a hard landing and fuel lines leaked. There were also incidents when a fueled Komet would blow up just sitting on the tarmac waiting for the pilot to arrive.

The Kit

This is a double kit, containing two of everything in one plastic zip lock bag. The decal sheet has enough markings for three aircraft. Only one set of instructions, but that’s enough.

Review Author
Jim Stepanek
Published on
Company
Round 2 Models
Scale
1/25
MSRP
$26.69

Round 2 reissued the vintage Owens Deluxe Cruiser kit. When building you need to bear in mind that this kit and molds are over 50 years old, and it shows. The flash is so bad on some sprues that it’s difficult to locate the actual part(s). Nothing fits together tightly without some serious massaging to the parts to be joined.

The instruction sheet is a very basic affair that had me thinking quite a few times as to part placement.

The Owens Deluxe Cruiser is the first boat I’ve built since way, way back when I built the Robert E. Lee paddle wheeler when I was a kid, so this is totally out of my realm. Now I have to build a trailer and then a vehicle to haul to and from the water.

Patience is the key to the build. Test fit, refit and sand as needed and you can have a nice looking kit but expect it to take extra work due to the age of the kits molds.

Thank you to Round2 for reissuing this kit and thank you to IPMS for allowing me to review the kit.

Review Author
Eric Christianson
Published on
Company
Dragon Models
Scale
1/35
MSRP
$67.99

Dragon has recently released five new kits, none of which have been available in plastic before, at least not in the released versions. Instead, modelers would have had to scratch build them or buy expensive resin conversion sets.

This review covers one of the kits; the 15cm s.IG.33/2 (Sf) auf Jagdpanzer 38(t) Hetzer. This Czechoslovakian 38(t)-based vehicle looks unusual, sporting the large-caliber, 150mm field howitzer used on a variety of other (mostly larger) German AFV’s. Just imagine the recoil from that gun when fired from the diminutive Hetzer!

Intended as a replacement for the Grille, only 30 were built, from December 1944. Operational history is scarce, but based on the few images available it was apparently used in combat on the Eastern front.

This is an unusual armored vehicle and promises to build into an unusual subject for German WWII armor fans.