Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Book Author(s)
Charles Stafrace
Review Author
Dick Montgomery
Published on
Company
Guideline Publications
MSRP
$22.00

Authored by Charles Stafrace and illustrated by Richard J. Caruana, this book covers the development, deployment, service, and retirement of one of the most ubiquitous aircraft flown by the United States Navy, that being the A3D Skywarrior. Aviation historians and modelers, alike, will find this book to be a treasure chest of information.

The written content is well written, in clear and precise language. The content is presented in chronological sequence, as most publications of this type are, beginning with the need for an aircraft to replace the AJ Savage. As the engineering of the “Whale” evolved to meet the strategic needs of the aviation arm of the US Navy, so did the engineering change to match those needs. Variant after variant, the A3D continued to adapt to the environment of the day.

Review Author
Robert Head
Published on
Company
Eduard
Scale
1/72
MSRP
$19.95

What’s in the Box?

This Eduard Brassin set is for the Eduard Fw 190A-8 kit. The set includes detail parts to add to a highly detailed engine to replace the simple kit piece and make for a very detailed open paneled butcher bird.

The resin and photoetch parts inside the box looked great and are very well molded and even the etched parts, while microscopic, provide an added value and level of detail.

The 20 included items are as followed in this boxing breakdown:

  • 5 Main Engine Assembly pieces
  • 6 Sub Engine pieces and assemblies
  • 8 Replacement panels and propeller cowling
  • 1 Photoetched fret to include harnesses, fuel lines, wiring and chain assemblies

The Engine Buildup

The assembly instructions are very clear and detailed but very busy at times and will definitely have you looking at front and backs, and taking this thing apart frequently to test fit.

Review Author
Ben Morton
Published on
Company
AFV Club
Scale
1/35
MSRP
$64.99

This is what the website Army Recognition has to allow about the Raytheon Hawk Missile: The HAWK (Homing All the Way Killer) MIM-23 is an all-weather low to medium altitude ground-to-air missile system developed and designed by the American Defense Company Raytheon. The HAWK semi-active radar seeking medium-range SAM system commenced development in 1952 with the US Army awarding a full-scale development contract to Raytheon for the missile in July 1954. Northrop was to provide the launcher and loader, radars and fire control. The first guided test firing took place in June 1956 with the development phase completed in July 1957. Initial Operational Capability (IOC) of the Basic HAWK, MIM-23A, took place in August 1960 when the first US Army battalion was activated.

Follow the link to a video, via Critical Past, of a Hawk missile blowing a QF-80 drone to smithereens.

Review Author
Robert Head
Published on
Company
Scale Aircraft Conversions
Scale
1/32
MSRP
$17.95

Short History

As we all know the FW-190 and all of its variants have been manufactured in one form or another by just about all major kit companies, this particular item being reviewed though is for the newly released Revell kit.

What’s in the Box?

The box comes with a total of 8 white metal pieces of all varying sizes all replicating the kit parts very accurately and adding some needed strength to support the aircraft. The Landing gear comes packaged in the typical SAC cardboard and bubble blister packaging we are all accustomed to seeing.

The Build

This is a pain-free operation and only required a little time and elbow grease using a couple of files and some sanding paper as white metal pieces can be porous and also have little burs that need to filed and sanded down, so that also means a little safety is required.

Review Author
Frank Landrus
Published on
Company
Eduard
Scale
1/48
MSRP
$33.00

Background

The Yakovlev Yak-28 (Яковлев Як-28) was a multi-role aircraft that was an outgrowth of the Yak-25 that featured a shoulder mounted swept wing to reduce foreign object damage (FOD) from unimproved runways. Like its predecessor the Yak-25, it was produced as a tactical bomber role as well as in the reconnaissance, electronic warfare, interceptor, and trainer versions. The Yak-28 was known under the NATO reporting names Brewer, Firebar, and Maestro respectively.