History

If you were born in the last century at any time, you probably remember an older relative- perhaps a grandparent or older aunt who had an outhouse in the backyard. At the very least-- maybe a campsite or campground anyways. I frequented the one in my grandfather´s backyard as it was much easier than having to take off my shoes to go in the house and back then, I never wanted to come in. ICM has provided a relatively straightforward kit of the standard field toilet, although to be sure- one would probably only see these in more permanent set-ups. Most of the time these were set up over a hold in the ground with no wooden floor- but this is a dolled up version to be sure.

The Kit

Inside the durable cardboard box is just one sprue that contains the roof, door, sides, rear, and front frame of the assembly. There are also a few parts for the seat and inside assembly as well as a latch to lock yourself in and a handle for the front.

To start part 2, I started with the unique horizontal stabilizers. These are molded in a single piece (check out part one for a picture. This slots into the bottom of the fuselage with a rubber grommet and the two moving parts are actually separate allowing the entire thing to be posed. The fit is so good; I assembled the parts and left them off until later to ease painting.

I assembled the tail next and it consists of four parts. Since I was doing the VF-111 plane and its tail was white, I was worried about masking it off; no need to , the fit is so good, it also can be added later making painting easier. I did add the outer wing panels at this time and did have to do a little bit of filling with Perfect Plastic Putty.

This is a re-release of the F-104 A/C kit originally released by Italeri back in 2014. The kit includes six sprues of grey plastic, one clear sprue, a photo-etch sheet and two large decal sheets. In examining the sprues, it is clear that some of them are common to Italeri’s 1/32 F-104G as the sprues include the later zero-zero ejection seat, AIM-9L Sidewinders, several pylons that are not used on the F-104A or C, as well as two styles of ventral fins and exhaust nozzles. The decals depict five F-104As and one F-104C, however two of the six aircraft (markings E and F) are repeats from the original 2014 issue. Unlike the previous release, all 6 of the aircraft depicted in this kit are in a natural metal finish with white upper wings.