Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
James Woody
Published on
Company
AMT
MSRP
$13.95

All right, a new Star Wars kit. AMT has finally released the Corporate Alliance Droid from the Revenge of the Sith©. This kit features 37 parts molded in light gray plastic and instructions. There are no decals or painting instructions provided with this kit, even though the instructions call out 11 different colors of paint.

The molding is fairly sharp with some ejector pin marks and mold separation lines. One part has the Lucasfilm copyright marking right were it will be seen, rather than on the inside of a part. The tracks are molded in one piece with separation lines down the middle and mold stubs all over the inside that will require some careful cutting to remove.

Overall this is a welcome kit from the Star Wars universe and with a little research on painting should make up into a very nice model.

© 2005 Lucasfilm Ltd. & TM. All rights reserved.

Review Author
James Woody
Published on
Company
Fine Molds
Scale
1/72
MSRP
$230.00

What can I say about this new model kit except WOW. The box is a whopping 17.75" x 27.75" x 4". Inside the box there is 16 part trees, a poly bag of screws and poly caps, decals, and a 24 page instruction booklet. The instruction booklet has 34 steps with options to build the Falcon from either Episode 4 or 5, because you get figures of Han, Chewie, Luke, Leia, C3P0, and Obi-Wan seated (for display in flight on the display stand) or of Leia, Luke, Han, and Sandtroopers standing with weapons. You get a paint and decal placement chart that is the size of the box, and a second sheet that has color photos of the filming prop.

Review Author
Pablo Bauleo
Published on
Company
The Small Shop
MSRP
$39.99

Photo-etch bending could sound intimidating but it shouldn't, particularly if you have the right tools for it. The Small Shop has designed "The Bug" to be the one-stop photo-etch bending tool. The tool is very well designed; compact, versatile, easy to use and made of aircraft grade aluminum.

The rotating head has a 2-inch straight edge for long bending lines, a "swiss comb" side with 6 "teeth" for boxes, and a variety of fixtures to fold parts of different sizes and material strengths, or for scratch built handles. All of these in a compact 2x2.5 inch base. It should be mentioned that some of hold-down fingers are reinforced for bending thicker brass, while others designed for thinner, more delicate parts. It is a nice touch from the Small Shop to include a razor blade (used for folding) with the tool.

Review Author
Rob Benson
Published on
Company
The Small Shop
MSRP
$9.50

What You Get in the Bag

The Photo Etch Part Cut-Out Kit is packaged in a simple poly bag containing 3 black 3/32 inch-thick Plexiglas square tiles just shy of 4 inches on each edge, 1 clear 3/8 inch diameter Plexiglas rod 1 inch long, and 1 clear 3/32 inch thick Plexiglas tile measuring 1 by 1.5 inches. The rod has a slight chamfer (a 45 degree cut that softens the edge) on one end, and one long edge of the small clear tile is also chamfered. A one page instruction and description sheet is included. All of the parts were loose in the bag, but the black tile had protective paper to protect the finish.

Review Author
Andy Renshaw
Published on
Company
The Small Shop
MSRP
$27.95

The Small Shop, the makers of the "Hold-n-Fold" photo-etch workstation, have added a new tool to their lineup, the "Standard Rolling Set".

This set comes with a milled aluminum base and a total of twelve rollers in metal and wood.

  • Wood - 3/4", 5/8", 1/2", 7/16", 3/8", 5/16", 1/4" & 3/16"
  • Steel - 0.125", .09375", .078" & .0625"

The milled base has a series of rounded cutouts that many of the smaller rollers will fit into. The base is not needed for the larger diameter rollers.