History

The Macchi C.200 had its origins in a series of Schneider Cup seaplane racers designed by Mario Castoldi during the early thirties. The prototype C.200 first flew in 1937, and was an all-metal, low wing, radial powered monoplane possessing extremely clean lines. Its main drawbacks were its low powered 870 hp. Fiat A.74 engine and its meager armament, two fuselage mounted 12.7 mm. machine guns. Nevertheless, its flying characteristics were excellent, and it was selected for mass production, and a total of about 1,200 were completed by Macchi, and also Breda between 1939 and 1943, when it was replaced on the production lines by the C.202.

MMD-Squadron has released two unique detail parts in their True Details line that 1/32 scale model builders should find very useful. True Details USAAF WWII Parachute #1 (#32508) is a highly detailed 1/32 scale replica of a Type AN-6510 parachute that is casually posed as an aircrew chute would appear in pre or post-mission repose with integral pack (upturned), cushion, harness and intricate hardware. It is molded in gray resin on a very thin amount of resin molding scrap. This is a perfect accent for any 1930s-WWII US aircraft model. It is posed in the way parachutes were typically placed on the wings or stabilizers of fighter aircraft prior to a mission so pilots could quickly ‘suit up’ for a takeoff. This unique detail part is sculpted with an amazing amount of detail and is packaged on a blister card with a foam pad backing to protect the fragile features of the casting. No assembly is required.

I would like to thank Master Model for this review sample.

Master Model has been literally “turning” out numerous metal details for the model maker. This latest offering is the Alpha Probe and angle of attack probe for the F-14 in 1/48. The alpha probe is the pitot at the forward end of the radome. For a model this is a very vulnerable place and no doubt, like me, you have managed to bend or snap off the plastic one provided in the kit. Quite frankly, they never look as crisp as the real thing and once the mold seam is removed can be a bit oblong in cross section. The angle of attack probe is the pointy short probe on the left side of the F-14 below and forward of the cockpit. On the Hasegawa kit it is molded with the fuselage. I managed to snap mine off while assembling the model. It is not an easy thing to replicate.