You want your Flogger to stand out on the model table? How about opening up the entire nose section? Now we are talking. What can be cooler than complete electronic bays? Normally the whole process would be hours of research, and then hours of scratchbuilding. Thanks to Aires, this will be significantly easier.

You get 25 high-quality light grey resin pieces that feature bulkheads, access panels, and radio/radar equipment. Unlike most Aires sets, this set does not come with any photo etch parts. Everything is rendered perfectly in resin. The bays are deep and have the equipment added from behind. Just exquisite molding.

You think you have to wire the electronics? Nope; miraculously, Aires has even molded the wiring. All the modeler will need to do is artful painting.

Plusmodel’s Aero Line continues its tradition of providing the modeler with simple and interesting pilot figures. The latest is a pilot for the MiG-15. This is a two-piece figure. The biggest part is the pilot himself. The other piece is the parachute pack. Both are perfectly cast in light grey resin. There is very little clean-up required. The thin wafer of material around the figure is easily removed by hand and cleaned up with a sharp blade. The face is perfectly formed. The proportion of the figure are perfect. The stance of the pilot is relaxed and completely natural. The equipment is perfectly sculpted, as well. I could not find anything I didn’t like. The small parachute pack is easily attached to the pilot’s backside.

The figure is safely packaged in a plastic container with the parts safeguarded by a piece of foam. Included on the packaging is a painting of the figure. Inside the packaging is the same painting but much larger.

Let’s face it, ejection seats in kits usually leave something to be desired. Usually, the culprits are the lack of seat belts or just the limitation of the plastic molding process. The ejection seat is also the most visible part of the interior, either with the canopy open or closed.

It sure would be nice to have a well-detailed seat in your Hun. Quickboost provides just that – a perfectly detailed seat complete with seatbelts and shoulder harness. It is easy enough to remove the resin pour block. My example was perfectly cast in light grey resin. It is perfect and just needs a coat of paint to bring it alive. It is an easy addition to either your Trumpeter or Monogram Hun.

Easy installation, perfectly cast, and highly detailed...what more can you ask for? Absolutely nothing. Another great product from Quickboost. Remember if you are doing an F-100F you will need two seats.

Highly recommended.

Thanks to Quickboost and IPMS/USA for the review copy.