Aircraft and History

The F-4 Phantom II was originally developed for the United States Navy and made its first flight on 27 May 1958. Exactly 5 years later, the first USAF Phantom II flew and that version was the F-4C. These early Phantoms did not have an internal gun which was an issue in close combat and when the missiles were unreliable. This kit represents Col Robin Olds aircraft as it appears in the National Museum of the US Air Force and the box art shows the phantom during Operation “Bolo” on 2 January 1967. During “Operation Rolling Thunder”, F-105 fighter bombers (heavily loaded) were being attacked by North Vietnamese Mig-21 fighters and sustaining high losses of F-105’s. In response to these attacks, Col Olds devised a tactic to trick the North Vietnamese air force into thinking the Phantoms were F-105 on a bombing run which were being attacked by Mig-21 aircraft.

Master Models now provides coverage of the Airfix 1/48 Lightning kit with a perfectly formed replacement pitot tube. Master Models is well known for their superb turned brass parts and this set is another fine example. The set is one part of perfectly turned brass to replace the kits parts.

Here's a great picture of the pitot tube and how far it sticks out from underneath the front of the plane.

Pitot Tube Photo

The instructions are great. In this case , the kit part is cut off of the support, a small hole drilled and the new part inserted. As you can see by the comparison pictures, the kit parts is straight, much thinner and too scale and also has the durability of brass. Another hit for Master Models.

Highly recommended for both accuracy and toughness. My thanks to Master-Models and IPMS/USa for the chance to review it.

Master Model from Poland specializes in metal turned parts for aftermarket kits. In my personal opinion, they are among the best in the market. I really like their products, and this set in particular is probably one of the nicest I have seen from them.

This set is devoted to the weapons of the Hawker Hurricane Mk IIC. There are several kit options in 1/48 scale: Hasegawa, Hobbycraft and Italeri. This set can be used with all of the above, with different modifications in each case.

For any of the base kits, you are instructed to drill holes in the wings for the fairings and to replace the plastic parts with the metal ones. In the case of the Hasegawa model (see photo), it could be possible to modify the wing fairing and just use the cannon barrel. You’ll lose a bit of detail, but you “gain” less effort needed to modify the kit. For the Hobbycraft and Italeri models, you have to drill the holes and use the full metal assembly.