The AN-2 "Annushka" bi-plane (NATO designation “Colt”) is a throwback from a very earlier age, not only because it is a biplane, but because of the larger Shvetsov Ash-62 9 cylinder radial engine that powers it. On the right side of the plane is a single large exhaust pipe that belches fire and smoke when in operation. The pipe on the real AN-2 comes out from the engine at a shallow angle of incidence and then makes a radius bend outward to carry the exhaust away from the fuselage.
Welcome to the IPMS/USA Reviews site!
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.
To learn more about IPMS/USA, please see our About Us page.
When I first saw this model kit as being available to review for IPMS/USA, I must admit I was ignorant of its importance in the history of tank development and warfare. Developed from the British Vickers 6 Ton tank of the late 1920s, the T-26 series of tanks was one of the most important of the 1930s, and together with the Soviet BT series, provided the backbone of Soviet tank forces in the interwar period. The T-26 was the most numerous tank of the Spanish Civil War, provided a large component of Soviet tank forces during the Finnish/Soviet conflict of 1939-40, and despite falling behind in design compared to improvements in anti tank gun development, was the most numerous tank in the Soviet arsenal when Germany launched Operation Barbarossa in June 1941.
This latest weapons set from Aerobonus contains all the parts necessary to represent eight 3-inch aircraft rockets and the launch rails used with them on a variety of British aircraft. The set includes eight rocket bodies, along with four different 8-piece sets of warheads (for a total of 32 warheads). Also included is a photoetch set with clips to attach the rockets to the rails, individual rocket fins (32 of them) and a photoetch alignment tool to help set the fins properly in place. A comprehensive decal sheet completes the package.
Once the choice of warheads is made, assembly of the rockets is pretty straightforward. Be mindful, the resin is somewhat brittle; and around the insert holes in the rocket bodies, where the warheads fit, it is thin. The ends were already broken on two of the rockets in my set, and I chipped a third one assembling a tight fitting warhead. I had to re-sculpt the tubes with putty.
Model Art Magazine is a monthly magazine that covers aircraft, armor, ships and car modeling. Model Art started releasing magazines in 1966 and has evolved from there over the past forty six years.
The February issue starts off with a report from the 2013 Tamiya fair. Some of the kits on the horizon are a 1/6 Harley Davidson FLSTFB Fat Boy Lo, 1/72 Mitsubishi A6M3/3a Zero Fighter Model 22 (Zeke), 1/35 Ford GPA with engine, 1/35 German Horch Kfz. 15 "North African Campaign", 1/48 Russian 1.5 ton Cargo Truck Model 1941, paintbrushes and tools. Also included in the first few pages is a page dedicated to the Eduard 1/72 Mig-15 in Czechoslovakian in Service Dual Combo and the Eduard aftermarket sets that could be used with it. Another page covers an auto show and then the next installment of I.J.A/N. Airplane Illustrated. This month’s installment covers torpedo sighting devices. They use photos of the actual units and drawings in the article.
True Details has made a very nice 20mm Vulcan cannon for the Hasegawa F-104 kits. All the parts are well molded, have nice detail and clean up very easy. 13 parts make up this set including: Gun body (one with the shroud and one without), gun nuzzle, bracket, reservoir, hatch, control box, duct, regulator(X2) and gun body support(X2). You will have to use aftermarket or the kit barrels and neither the kit nor this set includes the braces that stabilize the barrels so you will have to make those.
One note - I wanted to use this in the new Italeri F-104 kit but it does not fit without a good bit of surgery although it gives me an excuse to pick up a Hasegawa kit now!!!
Overall, I would recommend this set as it has much more detail than what you get with the Hasegawa kit and it comes at a very reasonable price.
I would like to thank Squadron for supplying this set; IPMS for letting me review it and all of you for reading it.