Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Mike Van Schoonhoven
Published on
Company
Model Art
MSRP
$11.27

Model Art Magazine is a monthly magazine that covers aircraft, armor, ships and car modeling. Model Art started releasing magazines in 1966 and has evolved from there over the past forty six years.

Each issue of Model Art consists of a multitude of articles that reach out to all genres of modelers. From what I see, Model Art makes small changes to there format to keep each issue up to date and interesting to the reader.

This issue starts off with two short articles. The first being "MA New Item Special" and a diorama that takes place during the U.S. operation in Grenada featuring the new Tamiya Gamma Goat.

Book Author(s)
John Anderson and Richard Passman
Review Author
Ben Guenther
Published on
Company
Zenith Press
MSRP
$30.00

Much has been written about the world's most successful rocket powered research aircraft, the X-15. This airplane was designed to be a vehicle to provide aerodynamic, flight dynamic and structural data for use in the future development of hypersonic aircraft, all before anyone had even broken Mach 3. In October, 1954, NACA decided on the need for a manned hypersonic research vehicle, one that would fly up to Mach 7 and over 126,000 feet in altitude. By the end of the program the X-15 had reached a top speed of Mach 6.7 and an altitude of 347,800 feet during the course of 199 flights.

The authors; John Anderson, curator of aerodynamics at the Smithsonian National Air and Space Museum and Richard Passman, chief aerodynamicist on the Bell X-2 have crafted an excellent introductory story for this aircraft.

Basically, they do this by explaining the X-15 and how it worked, then going into details of the twelve pilots who flew this machine. The six chapters are:

Review Author
Rod Lees
Published on
Company
Master Model
Scale
1/48
MSRP
$4.50

Another in a long line of excellent turned metal (brass) items from Master Model. IPMS/USA sincerely appreciates the Master Model’s support in providing a world-class product to improve our models… THANK YOU!

I am always fascinated by the level of detail these parts have on them. My only experience with turning metal is best left unsaid, however these probes are almost as close to perfect as they can be.

This package contains two metal parts in a double-bag system. The outer bag holds the protective card with details on the contents, and then an internal “small” bag holds the even smaller pitot and AOA (Angle of Attack) probes.

Review Author
Joe Porche
Published on
Company
Revell
Scale
1/25
MSRP
$99.95

Revell graced us with the re-release of the “Can Do” and now the “Will-Do” 14 wheel Peterbuilt 359 Heavy Wrecker. This kit contains close to 700 parts of which nearly 40 are not used. The box alone is massive in size, some 20” x 14” x 5”, which sizes up well with the completed model of 18” long with everything folded up for travel. If you choose to build the kit with all the options in wrecking recovery pose it is well over 30” long and 10”wide and as much as 15” tall.

Speaking of options, both of the cab doors, the hood, and the outrigger doors can be posed in the open or closed position, the side and rear outriggers can be set as in use and the boom may be raised, extended and transversed to the left or right. I chose to build my wrecker in the travel mode but definitely played with all of the other options.