3

Crusader Mk.III with British Crew

Cockpit assembly

Skandinavisk Aero Industri (SAI), SAI KZ II

Finished

Dauphin II SA. 365N

Finished left front

USAF B-47 "306th BW(M)"

Complete 1

Kawasaki I-GO-1 Otsu Ki-148

Cart and Bomb

OKB Chelomey 16KhA Priboy

Finished T-54-2 model closeup of road wheels

T-54-2 Model 1949 Soviet Medium Tank

Right side

MiG-15bis

Interior right

Roland C.IIa Late

Completed Frame

Alfa Romeo 2300 8C Monza Race Car

Previous Next

Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Instructions

Wright R-3350 Duplex Cyclone Radial Engine
Review Author
Brian R. Baker
Published on
Company
Modelshack
Scale
1/72
MSRP
$5.00

History

The Wright R-3350 twin row radial engine started its development cycle in 1937, and the engine first flew on an airplane in 1941. It was an eighteen cylinder radial engine originally rated at 2200 hp, but later models with fuel injection produced over 3600 hp. Used in the Boeing B-29 during the war, the turbo-compound version developed after the war was used in various types of airliners, including the Lockheed Constellation and the Douglas DC-7. More recently, these engines have powered Reno-type air racers, notably Hawker Sea Furys and Grumman F8F Bearcats.

Google lists many types of aircraft that used these engines, including many prototypes

Box Art

’63 Corvette Sting Ray
Review Author
Jim Stepanek
Published on
Company
AMT
Scale
1/25
MSRP
$23.99

Round 2 Models, under the AMT brand, has re-released this 1/25 scale 1963 Chevrolet Corvette Sting Ray. The kit features 1970’s Street Rod Series box art. The Retro Deluxe reissue contains a vintage 3-in-1 kit with a new, full-color decal sheet and pre-lettered drag slicks. Although the kit shows its age in the form of some excess flash, the parts do fit together pretty well.

Engine

The stock 327 engine has several options to choose from: a 4-barrel, fuel injection, three deuces, four Webers or a blown intake setup. You can also select from stock exhaust manifolds or two different sets of headers. These accessories are some really nice parts. I chose the Webers, but used the carbs from a Falcon kit and resin air filters.

Chassis

There’s nothing to the chassis other than gluing a couple of axle blocks into place.

Interior

The interior is just a tub with poor engraving. Though the dashboard is fairly crisp.

Packaging

Bf 109E Fabric Seatbelts
Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$12.95

One of the things that I find challenging about photo-etch seatbelts is that they are difficult to drape properly, especially the pre-painted type. It can be done, but inevitably some paint will chip or the metal just won’t bend properly to simulate the look of real fabric. Well, Eduard has a new twist on belts; actual fabric seatbelts that are pre-painted.

This set comes packaged in Eduard’s standard bottom-opening package. Inside you’ll find a nickel-plated photo-etch fret and a fabric “fret.” The nickel-plated PE features the shiny buckles and bits. There are no extras, so don’t lose them to the carpet monster! Some extra pieces would have been a nice addition. The fabric “fret” is a flexible material mounted onto a fabric backing. With the backing peeled off, you are left with a really thin fabric seatbelt. Another advantage of the fabric is that the belt is the proper color on both sides and it won’t chip.

Packaging

Soviet Air Force Fighter Pilot - Winter Suit
Review Author
Floyd S. Werner Jr.
Published on
Company
Aerobonus
Scale
1/48
MSRP
$10.00

With the release of newer modern-era Soviet aircraft, such as the MiG-21, MiG-29, Su-27, Su-25 and others, there is a market demand for a figure to stand beside the aircraft for scale appearance. Until now there has been a very limited selection. Aerobonus answers this call with their simple, but effective, figures.

The latest release is a winter-dressed pilot. He has his helmet on and his hands in his pockets. The figure’s head is tilted up slightly, as if looking at the cockpit or an overflying aircraft. The pilot figure comes as a one-piece molding that is flawless. I don’t see any mold lines that need to be cleaned up. Just a simple cut at the feet and this figure is ready for paint. The painting instructions are printed on the back of the packaging insert. The painting instructions are very basic, with a simple drawing calling out generic colors like white, black, and gray-blue. That said, the callouts are adequate for the figure.

Packaging

FW-190A-F Prop & Spinner VDM-9-12176A Wide Wooden Blades
Review Author
Floyd S. Werner Jr.
Published on
Company
Ultracast
Scale
1/48
MSRP
$12.25

Ultracast has cut out a niche market for itself with propellers. Their latest releases are designed for the Hasegawa Focke Wulf 190A/F.

Late-war Focke Wulfs were often fitted with wider-blade wooden props. This particular model of prop blade has a pointed tip, which is hard to replicate. Until now they have been difficult to find and their shape has not been quite correct. Ultracast has captured the shape perfectly for the first time.

This set is packaged in a small plastic bag secured onto a cardboard backing. The resin is typical Ultracast, molded in a light caramel color and free of blemishes. There are minimal pour blocks, which can be cleaned quickly and easily. Minimal flash is present on the spinner and cooling fans. Clean up of these castings will be easy with a new hobby blade.