Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
David Horn
Published on
Company
Brengun
Scale
1/144
MSRP
$6.90

Brengun produces a wide range of unique resin and photo-etch accessories in 1/32, 1/48, 1/72 as well as 1/144. This wheel set is cast with zero flash with prominent pour blocks up half the wheels. The finish is slightly textured but realistic and raised lettering is not visible however in this scale, reading the lettering should not be an issue to most modelers. The tread is not that deep but visible and realistic to 1/144 scale.

These wheels are for the “Super Hornets” which differ from the “legacy”. The tread does match reference photos, although shallow, they are true to scale. Each tire has a slight expanded section for weight on wheels. Compared to Dragons EA-18G Growler injection molded wheels, you can see the advantage of the Brengun wheels.

Review Author
Scott Hollingshead
Published on
Company
UMM-USA
MSRP
$12.95

During the IPMS USA Nationals this year, John Vojtech was kind enough to provide several of his tools from Unique Master Models (UMM) to the IPMS Review Corps, and this was one of the items I was fortunate enough to receive. Consisting of an ergonomic plastic handle, eight drill bits, and a bit removal tool, everything you need for drilling small holes is provided in one convenient set.

Measuring 120mm in length, the handle is quite comfortable to hold and the drill bits easily slide into an opening in the end. The drill bits are designed with a grooved base that securely locks into the handle. The bits are 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0mm in size, which are sizes commonly called out in kit instructions, and UMM recommends this set for fine detail work. The wedge-shaped removal tool aids in quickly changing out the bits.

Review Author
Marc K. Blackburn
Published on
Company
Airfix
Scale
1/76
MSRP
$8.99

For a long time, Airfix has continued the tradition of reboxing their older kits from their 1/76 scale line. Since this is a reissue, despite the newer box with red highlights, this Sherman M4A2 comes from a mold that is pushing 60 years old (and it shows). The kit includes rubber band tracks and a couple of sprues. Given the age of the mold, the parts are in okay conditions, though there is flash. Certainly, the parts are not as crisp as in a new kit, but they are adequate. When you compare this Sherman with newer kits, the details are soft. I can only assume that the vehicles depicted through the decals are new to this reissue.

Review Author
David Horn
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$16.95

Scale Aircraft Conversions (SAC) manufactures white metal landing gear that is a direct replacement for the kits plastic landing gear. The metal landing gear offer greater strength over the kit parts as well as having most of the mold lines removed. At times the metal will be bent out of shape but that is easily corrected by bending it back to the correct shape.

This set includes twelve parts, the two centerline main gear struts (front and rear), retract and bracing arms, landing light, and outrigger gear. All the main gear, various linkages, and outriggers are exact copies of the kit parts with most of the mold lined cleaned up.

Review Author
Gino Dykstra
Published on
Company
Master Model
Scale
1/35
MSRP
$13.99

Every once in a great while you run into something in the modeling world that really makes you stand up and take notice. I think Master Models has finally hit about the limit of size feasibility in the scale business – 1/35th scale empty .30 caliber shells that are literally on the edge of visibility for an old coot like me.

This package comes with 25 pieces that are absolutely remarkable for their size and detail. Despite their minuteness, they’re not just little pieces of brass rod, but actual shells with rims and a shell opening on one end. I honestly don’t know how they are even capable of manufacturing something this small – they’re smaller than grains of rice and are closer to the size of (hope this isn’t too disturbing) head lice. As you can see, they’re hard to photograph because they’re so small. Absolutely amazing!