History

The M3 Bradley Cavalry Fighting Vehicle (CFV) is an American tracked armored reconnaissance vehicle manufactured by BAE Systems Land and Armaments (formerly United Defense) based on the Bradley Fighting Vehicle Family. The M3 CFV is used by heavy armored cavalry units in the U.S. Army.

The M3 Bradley CFV is very similar to the M2 Bradley IFV (Infantry Fighting Vehicle) and is fielded with the same powerful two-man 25mm Bushmaster Cannon turret with the coaxial 7.62mm machine gun. It only varies from the M2 in a few subtle ways and by role. The M3 is classified as an armored reconnaissance and scout vehicle and does away with the firing ports found in the M2 series. The M3 also carries more TOW missiles as well as more ammunition for its 25mm and 7.62mm guns.

Continual thanks to one of our steadfast IPMS supporters, Ross at SAC, and to IPMS leadership for providing the set to me for review. Yes, it’s metal gear time again!

This set is the usual drop-in replacement for the Hasegawa series 1/48 P-40 warhawks. Parts include two main gear struts with torque links integrated, two side braces, retraction arms, and a tail gear. The tail gear is particularly welcome, as it is a typical offset one-arm tail gear, prone to damage from shelf abuse, moving models while dusting, or the occasional home pet attack.

Not much to say: Build the kit, then install the gear when you want. In this case, I assembled the airframe, and installed the gear so the kit would have something to stand on while I painted it. The pictures speak for themselves; the metal gear is a direct replacement for the kit items and fit with no problem.

This set is the first set that I can remember that allowed the modeler to pose the bulkhead behind the pilot in the open position. This will definitely set your Bf-109 apart from the rest. The one thing that comes to mind immediately is adding this set to make a Galland like opening with the lobsters and champagne. Yes I know that was an F model but you get the idea.

Molded in light grey resin with the minimal resin flash, there are three parts for this set. There are four parts on the two pour blocks but you only need the three. The big piece is a one piece affair that will slide nicely into your kit. You will have to remove the pour block on this piece but after that it is already done for you. The bulkhead is a direct replacement for the kit part, but this piece is opened so you can see into the storage area. The access door has detail on both sides, a very nice touch.