Welcome to IPMS/USA Reviews

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact the IPMS/USA First Vice President.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Scott Hollingshead
Published on
Company
DXM Decals
Scale
1/48
MSRP
$21.00

One of the newer suppliers for the IPMS-USA Review Corps is DXM Decals, the DXM stands for Double Excellent Models. While as the name implies, the company specializes in decals, they also produce detail parts and paint masks for airbrushing aircraft. The company produces their products for 1/72, 1/48, and 1/32 scale aircraft. The decals are printed by Cartograf, who is known for their quality work. Any modeler that has applied water-slide decals will have no issues with using this set.

This set contains decals for the AV-8B+ Harrier II in service with the USMC. There are markings for six aircraft serving from 2009 through 2024. The specific aircraft are as follows chronologically:

Review Author
Scott Hollingshead
Published on
Company
Reskit
Scale
1/48
MSRP
$31.99

One of the recent releases from ResKit is a set of 1/48 scale figures intended to go with your F-14 Tomcat. The figures look just like a pilot and RIO heading to their plane for their next flight. One is carrying their helmet in-hand while the other is carrying the bag used to transport the helmet. These two would look great next to a Tomcat on a flight deck or tarmac before the start of a mission and will be an easy addition for modelers with experience with 3D printed parts.

ResKit does a wonderful job with creating various parts and figures for an array of models. I have never been disappointed with any of the products that I have purchased or reviewed, and the level of detail is always top-notch. The figures in this kit are each printed as a single piece, so no assembly is required.

Review Author
Chris Vandegrift
Published on
Company
Reskit
Scale
1/35
MSRP
$25.60

Every time I review one of these red RESKIT sets, I reaffirm the quality and value that I associate with their name now. One of the things you’ll really appreciate about this is that with 3-D printing all of the small components are a part of the master print and so there’s no assembly required here. The resin is not brittle. It separates from very fine support tips easily without cracking or breaking. I will say, I did use my ultrasonic cutter for this because there are some pretty fine attachments where the pocket is for the blades. I did those last to try and make sure that they didn’t break while I was rotating the overall part to remove all the different supports. Another thing to watch out for is, the rope ends extend past the frame in a couple of places, so if you are using cutters in any way, make sure you’re actually cutting supports and not part of the assembly itself. Instructions look clear.

Book Author(s)
N/A
Review Author
Joe Terry
Published on
Company
UMM-USA
Scale
N/A
MSRP
$58.95

The RP Toolz, RP-Roll Rolling Set, is a heavy-duty tool made for rolling and bending metal to make barrels, tubes, and loops out of brass, aluminum, and copper.

Constructed of heavy duty aluminum and stainless steel, this rolling set has a solid heavy feel to it. The aluminum base is machined for a close fit of the stainless steel rods. Each fits well in its assigned slot and they are clearly numbered for size.

In testing different material with the set, I found that obviously the thinner the material, the easier it was to shape. I had decent success with a .016 brass strip in making a loop, however the smaller diameter I tried to go, the more force was required. I will take a moment here to remind of the importance of reading the instructions… In my first attempts I used the diameter stainless steel rod that was in the slot, this was not correct. The instructions say to use the next diameter rod down. Upon doing so, I had more success.

Review Author
Pat Villarreal
Published on
Company
Academy Models
Scale
1/48
MSRP
$45.00

Academy/MRC has released a new North American F-86F-40 Sabre in 1/48th scale with leading edge slatted wings. There are two new sprue-runners (H & I) with upgraded wings, slats, 200 gallon drop tanks, and main landing gear wheels.

From Scalemates.com, the original molding by Academy (in 1998) has the unslatted “6-3” wings. 7 of the 9 sprue-runners are from the original molding which includes two pilots (one seated and one standing), ordnance (bombs, missiles, & fuel tanks), and the option to modify the fuselage and show off the engine. A transport dolly to support the separated aft fuselage is included - NICE!

In The Box

The kit is enclosed in a top open box and comes with eight gray sprues, one clear, decal sheet, and a masking set. Instructions are well illustrated and easy to follow and contain 17 steps for assembly.